Blade Set
Blade Set
 |
US $9.95
How to ensure the Aluminum Saw Blade Life?
Proper blade maintenance and attention to the applications which are recommended for certain profiles can ensure the longest band saw blade life possible. They also lead to the most accurate cuts. Few problems slow down your aluminum-processing more than premature blade breakage. Fortunately, most causes are preventable. The first step is to make the sure the aluminum saw blade is properly sharpened and set. If you buy, RENEGADE A blades, you probably won't experience premature blade breakage.
When choosing a saw blade that is for your needs, the overall efficiency of the blade is optimized. If the blade used on the band saw is not for your needs, not only will it affect the performance of the saw, it will also shorten the overall life span of the blade. Many of the problems below are not common concerns for customers who choose RENEGADE A that are engineered to cut through metals quickly and smoothly. The unique quality of carbide, tooth strength and angle make for a superior product that performs an effortless cut after a cut.
Here are some of those problems that can be avoided while using the quality Aluminum Saw Blade:
- Inconsistent gullet
- Wavy cuts
- Reduced cutting speeds and premature blade breakage
- Too slow feed rate during cutting
- Not enough or too much hook angle
- Not enough/too much set in the teeth
- Too sharp a radius at the base of tooth
- Severe pitch build-up on teeth
- Grinding wheel maintenance
- Dressing the grinding wheel incorrectly changes the angles and contours that make up the blade profile, which in turn, changes a blade's cutting characteristics.
Top ways to increase your blade's life expectancy
1. Pay attention to detail: The sawyer has control over many of the cutting conditions that affect the blade. Monitor metal cleanliness, blade tension, feed rate, blade guide position, etc. and cut as fast as possible while still maintaining a straight cut.
2. Measure blade tension. Proper tension is critical for maximum blade performance and cutting speeds.
3. Clean the Aluminum: Dirt, rocks, sand and other foreign material that may be present will wear down the teeth faster. Dull blades require slow cutting speeds. One common and effective solution is the Aluminum RENEGADE A. The Renegade A is specifically designed for cutting through Aluminum.
4. Examine blade wheel belts. The blade wheel belts should be in good condition. Worn belts can allow the blade to contact the metal blade wheel, resulting in early blade breakage. The belts must also be of uniform thickness. Non-uniform belt thickness causes additional stress to a blade, resulting in mill vibration and reduced blade life. It is also important to keep the belts free of sawdust build-up.
5. Low cutting forces: Aluminum and other soft, ductile metals are characterized by low cutting forces and large chips. The most productive blade for such material has deep tooth gullets that better evacuate chips from the cut and prevent clogging to improve the quality of the finished work piece.
6. Examine the blade guide position. The blade guides must be positively aligned to provide stability and allow maximum cutting speeds. If the blade guides are tipped upward or downward, they will cause the aluminum cutting blades to cut in the same direction.
Selecting a saw blade for your band saw involves considering the steps listed above in order to ensure that you have one that will work effectively for the project that you are trying to complete. If the blade used on the saw is not appropriate for your needs, not only will it affect the performance of the saw, it will also shorten the overall life span of your project.
About the Author
Mark Bruddy is an expert who previously worked in a manufacturer and distributing company of diamond saw blades, aluminum saw blades and metal bonded diamond tools. He has got years of experience of this working with this hard material and its available benefits.
|
|
Blade Joint Protector Set $17.95 Blade Joint Protector Set |
|
|
Main blade grip set $3.31 Main blade grip set |
|
|
Main Blade Grip Set $5 Main Blade Grip Set |
|
|
HP03-P012 stabliizer blade set $2 HP03-P012 stabliizer blade set |
|
|
MAIN BLADE GRIP SET $1 MAIN BLADE GRIP SET |
|
|
Main blade clamp set $4.55 Main blade clamp set |
|
|
main blade grip set $3 main blade grip set |
|
|
Tail blade set for E303 $2.25 Tail blade set for E303 |
|
|
Tail Blade Set $2 Tail Blade Set |
|
|
Main Blade Set (Blue) $6.5 Main Blade Set (Blue) |
|
|
900B Main Blade Set $7 900B Main Blade Set |
|
|
Symmetrical Main Blade Set $11.5 Symmetrical Main Blade Set |
|
|
Main Blade Grip set $1 Main Blade Grip set |
|
|
Top blade grip set $1 Top blade grip set |
|
|
Top Blade Grip Set $2 Top Blade Grip Set |
|
|
Main Rotor Blade Set $4 Main Rotor Blade Set |
|
|
TOP BLADE GRIP SET $1 TOP BLADE GRIP SET |
|
|
Tail blade clamp set $3.48 Tail blade clamp set |
|
|
Tail blade set $3 Tail blade set |
|
|
Tail blade controlling set $6 Tail blade controlling set |
|
|
Main blade sustain set $3 Main blade sustain set |