Core Drill Diamond

Core Drill Diamond

Introduction to Diamond Drill Bits

Have you ever walked into a friend's house and seen the beautiful lights made partially out of old bottles, and wondered just how they did it?  The answer is that they used diamond core drill bits.  Diamond core drill bits come in many sizes, ranging from as small as 1/8" diameter to 6" diameter diamond core drill bits.  The best diamond core drill bits can drill up to 200 holes in 1/4" thick plate glass .  Though diamond core drill bits are versatile and hardy tools, they require specialized care specific to diamond tools.

 

Drill Bit Basics

 

All diamond core drill bits must be used in conjunction with coolant. Coolant may come in the form of simple water, or specially formulated diamond tool coolant.  If a diamond core drill bit is used without proper coolant, damage to the drill and glass is inevitable.  Both will almost definitely need to be replaced.  However, the need for coolant does not stop diamond core drill bits from being able to drill vertical surfaces, such as tile on shower walls.  In these cases, a second person is needed to continuously spray the surface that is being drilled.

 

Diamond core drill bits also must be used at the proper RPM.  Smaller diamond drill bits require higher RPM levels, while larger diamond core drill bits require lower RPM levels.  Diamond core drill bits from 1/8" diameter to 1/2" diameter, for instance, require an RPM range of 1600-2000 RPM, while the requirement for diamond core drill bits of 1-1/8" to 2" diameter is 1100-1400 RPM.

 

Diamond core drill bits should be used with a drill press whenever possible.  When using diamond core drill bits with a hand drill, care must be taken to avoid damage to the glass from uneven pressure.  Attention must be paid to the angle at which one is drilling, and be sure to drill around the diameter of the diamond core drill bit evenly.

 

Drilling Rings Make a Difference

 

Diamond core drill bits, and the requirements surrounding them, have forced glass industry professionals to find ways to easily drill glass in a variety of situations.  For instance, when using diamond core drill bits on a horizontal, flat piece of glass, drilling rings are the perfect way to keep coolant from running.  Simply use a piece of tape to cover the area being drilled from the opposite side, pour diamond tool coolant into the drilling ring, and drill.  Drilling rings do not work on vertical or uneven surfaces, but it is possible to make temporary drilling rings by using play-dough or other malleable material.

 

Drilling rings remove the need for a second person to spray the drilling area, and make using diamond drill bits significantly easier and faster.  Drilling rings come in many sizes, though buying a drilling ring that can only be used for a limited amount of drill sizes is rarely an economical choice.  Drilling rings that range in diameter from 1-1/2" to 4" are the most popular.  One of the reasons to use a small diameter drilling ring, however, is that these drilling rings can be used as guides for diamond core drill bits.  The hole in the drilling ring is large enough to use with diamond tool coolant and small enough to stop the diamond core drill bit from moving more than desired.  Drilling rings generally have suction bases, and are made of rubber.  Drilling rings make using diamond core drill bits much more efficient.

About the Author

Sarfaraz Khan provides best and reliable information about home improvement products including glass drill bit and diamond drill bits.

1-1/8 Diamond Core Drill Bit $41.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1-1/8. Works with a standard electric drill and only needs water as a lubricant. This is the ideal size hole to drill in your glass for pendant fixtures that include a candelabra socket. Fused lamp created by Julie Haan using large floral slumper 425720 and 1-1/8 diamond core drill bit.

Twofers Diamond Core Drill Bits - 1/8 $14.95 Two Bits for the Price of One. Aanraku brings you Twofers - superior quality, low-cost grinder and drill bits. Drill holes in your glass with this core drill bit. Great for jewelry making. Fits most electric drills. Coarse 100 diamond mesh grit for quick results.

3/8 Diamond Tech Core Drill Bit $30.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 3/8. Works with a standard electric drill and only needs water as a lubricant.

1/2 Diamond Tech Core Drill Bit $30.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/2. Works with a standard electric drill and only needs water as a lubricant.

1/8 Diamond Tech Core Drill Bit $24.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/8. Works with a standard electric drill and only needs water as a lubricant.

1/4 Diamond Tech Core Drill Bit $24.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/4. Works with a standard electric drill and only needs water as a lubricant.

1/4 Gryphon Core Drill Bit $14.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/4 Core bit with 6mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

2 Gryphon Core Drill Bit $51.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 2 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1/8 Gryphon Core Drill Bit $12.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/8 Core bit with 4mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1 Gryphon Core Drill Bit $29.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1-1/4 Gryphon Core Drill Bit $33.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1-1/4 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

3/4 Gryphon Core Drill Bit $24.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 3/4 Core bit with 8mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1-1/2 Gryphon Core Drill Bit $42.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1-1/2 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1/2 Gryphon Core Drill Bit $18.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/2 Core bit with 8mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

Inland 5/8 Core Drill Bit $56.95 5/8 (16 mm) Core Drill Bit. Inland diamond coated core drill bits come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 5/8 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image of Core Drill Bit Group courtesy of Inland.

Inland 7/8 Core Drill Bit $66.95 7/8 (22 mm) Core Drill Bit. Inland diamond coated core drill bits come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 7/8 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 1 Core Drill Bit $64.95 1 (25.4 mm) Core Drill Bit. Inland diamond coated core drill bits come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 1 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 3/4 Core Drill Bit $60.95 3/4 (19 mm) Core Drill Bit. Inland diamond coated core drill bits come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 3/4 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 1-1/4 Core Drill Bit $65.95 1-1/4 (32 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 1-1/4 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 4 Core Drill Bit $199.95 4 (102 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 4 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 2-3/4 Core Drill Bit $147.95 2-3/4 (70 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 2-3/4 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 1-1/16 Core Drill Bit $78.95 1-1/16 (27 mm) Core Drill Bit. Inland diamond coated core drills bits come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 1-1/16 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 3 Core Drill Bit $159.95 3 (76 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 3 diameter holes Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown below of Core Drill Bit Group courtesy of Inland.

Inland 3-1/2 Core Drill Bit $169.95 3-1/2 (89 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Drill 3-1/2 diameter holes. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 1/8 Core Drill Bit $25.95 Rugged diamond coated core drill bits feature a standard 3/8 diameter shaft to fit most drills and drill presses. It also features an ejection port to easily remove stuck plugs if they occur. This 1/8 diameter bit has many uses including drilling hanging holes in projects, creating pilot holes for making inside cuts with ring saws, or drilling holes in ceramic tile for custom mosaic installations. Use it on glass, ceramic tile, porcelain, stone, marble, plastics, fiberglass and more. Image shown below of Core Drill Bit Group courtesy of Inland.

Inland 3/16 Core Drill Bit $26.95 Rugged diamond coated core drill bits feature a standard 3/8 diameter shaft to fit most drills and drill presses. It also features an ejection port to easily remove stuck plugs if they occur. This 3/16 diameter bit has many uses including drilling hanging holes in projects, creating pilot holes for making inside cuts with ring saws, or drilling holes in ceramic tile for custom mosaic installations. Use it on glass, ceramic tile, porcelain, stone, marble, plastics, fiberglass and more. Image shown below of Core Drill Bit Group courtesy of Inland.

Inland 1/4 Core Drill Bit $27.95 Rugged diamond coated core drill bits feature a standard 3/8 diameter shaft to fit most drills and drill presses. It also features an ejection port to easily remove stuck plugs if they occur. This 1/4 diameter bit has many uses including drilling hanging holes in projects, creating pilot holes for making inside cuts with ring saws, or drilling holes in ceramic tile for custom mosaic installations. Use it on glass, ceramic tile, porcelain, stone, marble, plastics, fiberglass and more. Image shown below of Core Drill Bit Group courtesy of Inland.

Inland 3/8 Core Drill Bit $29.95 Rugged diamond coated core drill bits feature a standard 3/8 diameter shaft to fit most drills and drill presses. It also features an ejection port to easily remove stuck plugs if they occur. This 3/8 diameter bit has many uses including drilling hanging holes in projects, creating pilot holes for making inside cuts with ring saws, or drilling holes in ceramic tile for custom mosaic installations. Use it on glass, ceramic tile, porcelain, stone, marble, plastics, fiberglass and more. Image shown below of Core Drill Bit Group courtesy of Inland.

Diamond Tech Core Drill Bit Set $89.95 Buy The Set And Save. Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Includes the four most commonly used drill bit sizes 1/8, 1/4, 3/8, and 1/2. Manufactured by Diamond Tech, this set should handle all your drilling needs.

Inland 1-3/16 Core Drill Bit $62.95 1-3/16 (30 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 1-3/8 Core Drill Bit $68.95 1-3/8 (35 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 1-1/2 Core Drill Bit $69.95 1-1/2 (38 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image of Core Drill Bit Group courtesy of Inland.

Inland 1-3/4 Core Drill Bit $73.95 1-3/4 (44 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 2 Core Drill Bit $99.95 2 (50 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 2-1/8 Core Drill Bit $99.95 2-1/6 (53 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

Inland 2-1/4 Core Drill Bit $144.95 2-1/4 (57 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image of Core Drill Bit Group courtesy of Inland.

Inland 2-1/2 Core Drill Bit $149.95 2-1/2 (64 mm) Core Drill Bit. Inland diamond coated core drills come in numerous diameters and are indispensable for drilling holes in a wide range of materials. Key Features 3/8 (10 mm) shaft fits most hand drills and drill presses. Use on glass, ceramic tile, porcelain, stone, marble, plastics and fiberglass. Ejection port to easily remove stuck plugs if they occur. Product Uses Make holes in clock faces for clock works. Drill holes for drains in ceramic tile and stone work installations. Drill holes for plumbing lines and fixtures in ceramic tile and stone work installations. Create small holes for hanging. Make holes for eyes in glass projects. Make axle holes for kaleidoscope image wheels. Make holes for hanging jewelry. Drill in composite counter tops for plumbing fixtures. Drill in fiberglass boats for accessory and fixture installations. Cut out for outlets on mirrored walls. Cut holes for hardware on glass doors. Image shown of Core Drill Bit Group courtesy of Inland.

5mm Diamond Core Drill Bit $13.95 This drill bit is perfect for drilling holes in your art glass. Its small size makes holes large enough for wall hangings, but does not take away from the overall effect of the piece. Use it with the Dome Sconce Hardware Kit (item 627158) the Cone Sconce Hardware Kit (item 627160) and other installation kits and projects.

Diamond Products 01738 Core Bore Weka DK12 Drill Motor $3469.64 Diamond Products 3speed 14 amp motor can handle core bits up to 3 hand held or up to 6 mounted in a core rig. The Dk12 has thermal overload protection so if the load is too great and the heat becomes too much the motor will shut down until it cools off. This protects the armature from premature wear. The DK12 includes a side handle water connection and bubble levels.

Gurren Lagann: Core Drill Necklace $8.99 Gurren Lagann: Core Drill Necklace Brand: Gurren Lagann