Corner Finisher
Corner Finisher
![]() |
Optimize the Space in Your Living Room with Corner TV Cabinets
If you have limited space in your living room then you may find it difficult to store and display your television equipment. Modern televisions are large and all the associated equipment can take up a lot of room. TV stands can take up a lot of floor space in your living and could intrude on the overall design. A good solution is corner TV cabinets. These pieces of furniture are shaped to fit back into the corner of a room and make the best use of areas with restricted space.
Types of TV Corner Cabinet
TV corner cabinets are available in different designs so you should be able to find a style to suit your living room. If you have a modern décor then one of the glass, plastic or metal corner TV stands can be a good option. These smart, contemporary looking TV stands are widely available and come in a good range of different shapes and sizes. They are also affordable and are a cost effective way to store and display all of your home television equipment. If your home has a more traditional décor then a wooden corner TV cabinet can be a more suitable option. You should be able to find a finish to match your own furniture whether it is beech, oak, maple or pine.
Setting up TV Corner Cabinets
You will need to follow the manufacturer's instructions if you are setting up a corner cabinet from a flat pack kit. Once you have done this then you can install your television equipment.
Firstly you will need to make sure that there is adequate ventilation for your television equipment. DVD players, set top boxes and recorders can all get very hot as they are operating and so they need good ventilation if you are going to store them in a cabinet. Look for a TV corner cabinet that has plenty of air flow sections in the back or sides. Many wooden and laminate cabinets have only thin back panels so if you do not have adequate ventilation you could carefully cut a few air holes in the panel yourself using a jigsaw. Ensuring good ventilation for your television equipment will prevent it from overheating and increase its life.
Think about what height you need the television for comfortable viewing. If the cabinet is not high enough on its own then most modern televisions come with their own stands which you can use to adjust the height. You can also buy table top TV stands that can provide more range of adjustment.
When you are installing your equipment you need to think carefully about the cables and wiring. Corner TV cabinets have restricted access at the back so it may be easier to install all of the equipment with the cupboard slightly out into the room. Then when you have finished you can carefully move the TV cabinet back into the corner of the room out of the way.
About the Author
Corner TV cabinets are a practical solution if you have limited space available in your living room. They fit back into the corner of the room neatly and optimise the available floor space.
|
|
The Finisher $10 The Finisher - Oh, Sleeper |
|
|
Author And Finisher $13.49 Author And Finisher |
|
|
TapeTech 501F2A 2-in Corner Finisher Repair Kit $16.45 Blade Tension Spring - 400005. Center Clip - 402017F. Center Clip Assembly - 404014F. (2) 8-32 x 1/4-in Set Screw, 1/2 Dog SST - 059084. 6-32 x 1/2-in Fillister Head Screw SST - 059091 |
|
|
TapeTech 501F3A 3-in Corner Finisher Repair Kit $17.55 Blade Tension Spring - 450005. Center Clip - 402017F. Center Clip Assembly - 404014F. (2) 8-32 x 1/4-in Set Screw, 1/2 Dog SST - 059084. 6-32 x 1/2-in Fillister Head Screw SST - 059091. Blade Tension Spring - 450021 |
|
|
TapeTech 502F2 2-in Corner Finisher Blade Kit $65.95 (2) 8-32 x 1/4-in Set Screw, 1/2 Dog SST - 059084. 1(2) 4-40 x 1/8-in Set Screw - 409013. Screwdriver, TT - 056352. (2) Carbide Blades - 400009F. (2) Skids - 409011. Repair Instructions |
|
|
TapeTech 502F3 3-in Corner Finisher Blade Kit $71.45 (2) 8-32 x 1/4-in Set Screw, 1/2 Dog SST - 059084. 1(2) 4-40 x 1/8-in Set Screw - 409013. Screwdriver, TT - 056352. (2) Carbide Blades - 450009F. (2) Skids - 409011. Repair Instructions |
|
|
TapeTech TTCFS Corner Finishing Set $986 48TT - 3-in EasyRoll Adjustable Corner Finisher. 35TT - 8-in Corner Applicator with Handle. B75TT - Bazooka Pump with Filler Attachment |
|
|
Xerox Finisher - Finisher $849.99 097S03875 WorkCentre 6400 Printer Finisher Plain Paper Xerox Xerox Corporation www.xerox.com |
|
|
TapeTech TTCFS-M Mudrunner Corner Finishing Set $1589 14TT - MudRunner. 48TT - 3-in EasyRoll Adjustable Corner Finisher. B75TT - Bazooka Pump with Filler Attachment |
|
|
Ames CFCRNR Continuous Flow Corner Finishing Bundle $7999.99 CTPMP - Continuous Flow Pump (includes Hose, Whip Hose, and Z-Swivel). CTVLV - Radio Frequency Taper/Continuous Flow Controller. T14CF - Continuous Flow 42-in Corner Finisher Handle. T14EC - Continuous Flow 60-in Corner Finisher Handle. 48TT - 3-in EasyRoll Adjustable Corner Finisher. 48XTT - 3.5-in EasyRoll Adjustable Corner Finisher |
|
|
TapeTech 501F4A 3-in Easy Roll Corner Finisher Kit $18.65 Blade Tension Spring - 480005. Center Clip Short - 480017F. Blade Tension Spring - 480021. (2) 8-32 x 1/4-in Set Screw, 1/2 Dog SST - 059084. 6-32 x 1/2-in Fillister Head Screw SST - 059091. Center Clip Assembly - 484014F. (4) "O" Rings - 489028 |
|
|
TapeTech 502F4 3-in Easy Roll Corner Finisher Blade Kit $71.45 (2) 8-32 x 1/4-in Set Screw, 1/2 Dog SST - 059084. 1(2) 6-32 x 1/8-in SC Head Screw - 489013. Screwdriver, TT - 056352. (2) Carbide Blades - 450009F. (2) Skids - 409011. Repair Instructions |
|
|
Lexmark T65x Staplesmart II Finisher 500-Sheets Finisher 30G0850 $271.3 Lexmark T65x Staplesmart II Finisher 500-Sheets Finisher 30G0850 |
|
|
Oster Finisher Trimmer Model 76059-030 $49.9 Oster Finisher Trimmer Model 76059-030 |
|
|
Lexmark 22Z0016 Finisher - 3500 Sheet $2012.54 Lexmark 22Z0016 Finisher - 3500 Sheet |
|
|
Lexmark 47B1100 Finisher - 1000 Sheet $787.41 Lexmark 47B1100 Finisher - 1000 Sheet |
|
|
HP 2500-Sheets MultiFunction Finisher Q3634A $1007.5 HP 2500-Sheets MultiFunction Finisher Q3634A |
|
|
Kyocera Df-730 1000-Sheets Finisher 1205H10UN0 $1200 Kyocera Df-730 1000-Sheets Finisher 1205H10UN0 |
|
|
Samsung SCX-FIN11S Finisher $414.99 500 Sheet Samsung Printers: SCX-6345N SCX-6555N CLX-8380ND Finisher Plain Paper SCX-FIN11S SCX-FIN11S Finisher Samsung www.samsungusa.com |
|
|
TapeTech REK2 38-in to 95-in Kit with Corner Roller & Corner Finisher Versa-Pole $129.99 HRRE. HFRE |
|
|
TapeTech REK1 38-in to 95-in Kit with Corner Roller, Corner Finisher, & NailSpotter Versa-Pole $179.99 HRRE. HFRE. HNRE |
|
|
Oster Finisher Trimmer $74.95 Oster Finisher Trimmer. The Oster Finisher Trimmer features a whisper quiet motor with a narrow blade. Small trimmer great for ears eyes face and feet. Comfortable to use and calming to the animal. |
|
|
Xerox Integrated Finisher $527.99 097N01715 50 500 Sheet Xerox WorkCentre 4260 Printer Integrated Finisher Stacker/Stapler Xerox Xerox Corporation www.xerox.com |
|
|
Sharp Staple Cartridge for Finisher $52.99 5000 5000 Per Cartridge SF-SC11 Sharp Sharp Electronics Staple Cartridge Staple Cartridge for Finisher www.sharpusa.com |
|
|
Advanced Office Finisher - finisher (3 hole) with stacker/stapler (110 V) $1999 Xerox Advanced Office Finisher - Finisher (3 hole) with stacker/stapler (110 V) - for Phaser 7760DN 7760DNM 7760DX 7760DXM 7760GX 7760GXM 7760N 7760NM |
|
|
Xerox WORKCENTRE 6400 MFP FINISHER 097S03875 $967.02 Xerox WORKCENTRE 6400 MFP FINISHER 097S03875 |
|
|
LEXMARK BOOKLET FINISHER FOR X85XE SERIES 15R0335 $2810.39 LEXMARK BOOKLET FINISHER FOR X85XE SERIES 15R0335 |
|
|
Lexmark 3-Hole Booklet Finisher - 2000 Sheet 22Z0017 $3312.81 Lexmark 3-Hole Booklet Finisher - 2000 Sheet 22Z0017 |
|
|
Xerox Booklet Unit for Office Finisher 497K03850 $741.68 Xerox Booklet Unit for Office Finisher 497K03850 |
|
|
Samsung FINISHER PINZATORE SOLO PER SCX-6555N/SCX-6545N/CLX-8380ND/CLX-8385ND SCXFIN11S $440.55 Samsung FINISHER PINZATORE SOLO PER SCX-6555N/SCX-6545N/CLX-8380ND/CLX-8385ND SCXFIN11S |
|
|
Ricoh SR3030 3000-Sheets Finisher Requires 412880 413325 $1233.85 Ricoh SR3030 3000-Sheets Finisher Requires 412880 413325 |
|
|
Xerox Finisher (3 Hole) 3500-Sheets 097S03282 $2235.68 Xerox Finisher (3 Hole) 3500-Sheets 097S03282 |
|
|
Kyocera DF 710 3000-Sheets Finisher 1203JY0UN0 $1900 Kyocera DF 710 3000-Sheets Finisher 1203JY0UN0 |
|
|
HP 1000 Sheets Multifunction Finisher C8088B $2362.83 HP 1000 Sheets Multifunction Finisher C8088B |
|
|
Samsung Finisher For 6555NX Printer SCX-FIN20S SCX-FIN20S/SEE $637.8 Samsung Finisher For 6555NX Printer SCX-FIN20S SCX-FIN20S/SEE |
|
|
Bridge Unit BU3030 Provides paper transport from printer to finisher. Required when installing either finisher. Use with Ricoh $182.1 Bridge Unit BU3030 Provides paper transport from printer to finisher. Required when installing either finisher. Use with Ricoh |
|
|
On The Corner $8.99 On The Corner |
|
|
finisher with stacker/stapler - 1000 sheets $749.99 Lexmark - Finisher with stacker/stapler - 1000 sheets in 2 tray(s) - for C792de 792dhe 792dte 792e X792de 792dte |
|
|
Finisher (3 hole) with stacker/stapler $1999 Xerox - Finisher (3 hole) with stacker/stapler - for Phaser 5500DN 5500DT 5500DX 5500N 5550B 5550DN 5550DT 5550DX 5550N |


US $14.95





























