Diamond Core

Diamond Core

Diamond blades are the most effective and efficient way to cut concrete, brick, tile and other similar building materials. Since diamond saw blades require the use of a gas powered high speed hand held saw or a masonry table saw, safety should always be upper most in the mind of the saw operator. A few simple steps will help the saw blade user cut safely. First - Make sure the saw and saw blade are in proper working order before the saw is turned on. Second - Wear appropriate work clothing. Third - Always use proper safety equipment.

The first thing every tool user should do is inspect all equipment before beginning work. The saw should be clean and free of any damage. If the saw is electric, make sure the cord is not frayed or damaged. Inspect the plug prongs to make sure they are straight. If the saw is gas powered, make sure the saw is properly fueled and that the motor and the filters are clean. The saw blade should have plenty of wear left on the cutting edge. In the case of a diamond blade, there should be available diamonds still embedded in the blade segment or rim. Check to see that the blade is seated securely and correctly on the saw. The blade should be mounted so that it will spin in the proper forward direction. Many blades will have an arrow that indicates the direction in which the blade should spin.

Wearing proper work clothes is important. Do not wear clothing that is binding or that will restrict your body movement. Long flowing or very loose fitting clothing is never recommended. Wear long pants that cover the legs. Keep shirt cuffs, collars and fronts buttoned and shirt tails tucked in. Always wear closed toes shoes. Make sure that clothing is free of tears or rips and that there is no piece of loose clothing that could get caught in the saw or the blade.

Use protective safety equipment at all times. At a minimum, saw users should use earplugs or ear muffs, and full coverage face and eye protection and work gloves. Using a dust mask is also a good idea since brick, concrete and tile produce dust and small particles when cut. All eye, ear, face and respiratory protection devices must comply with state, federal and industry specific safety regulations and guidelines. A fully stocked first aid kit should be available at the work site whenever power tools are in use. All first aid kits should comply with standards published by the Occupational, Health and Safety Administration or OSHA. Make sure the OSHA approved first aid kit is rated for the number of people using the work site. All power tools should be used in an area that is well ventilated.

Finally, the tool user should be sure to read the saw operating manual before turning on the tool. Following basic tool safety guidelines is the most important part of completing any building or home improvement project.

Diamond blades should always be used with safety in mind.

14k White Gold Ellipses 1.80 Carat Diamond Fashion Bracelet $2460 A series of white gold ellipses features prong set diamonds with diamond-shaped windows and a circular core. Eclipse everyone else with a 14k White Gold Ellipses 1.80Carat Diamond Fashion Bracelet.

14k White Gold Yellow Sapphire Diamond Heart Pendant $420 This speCaratacular heart pendant places 12 yellow sapphires in the center of gorgeous diamond filigree detail. Love bur at the core of this passionate 14k White Gold Yellow Sapphire Diamond Heart Pendant.

Milwaukee 48-16-5013 5-in Premium Diamond Core Bit $399.99 5-in Premium Diamond Core Bit48-16-5013

Core $8.99 Core

The Core $12.49 The Core

To The Core $11.49 To The Core

1-1/8 Diamond Core Drill Bit $41.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1-1/8. Works with a standard electric drill and only needs water as a lubricant. This is the ideal size hole to drill in your glass for pendant fixtures that include a candelabra socket. Fused lamp created by Julie Haan using large floral slumper 425720 and 1-1/8 diamond core drill bit.

Twofers Diamond Core Drill Bits - 1/8 $14.95 Two Bits for the Price of One. Aanraku brings you Twofers - superior quality, low-cost grinder and drill bits. Drill holes in your glass with this core drill bit. Great for jewelry making. Fits most electric drills. Coarse 100 diamond mesh grit for quick results.

Diamond Products 05761 Core Bore 4 Premium Black $993.33 Core Bore 4 Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete masonry. Offers Best Footage Speed. Top performance bit.

Diamond Products 05441 Core Bore 1.5 Premium Black $396.63 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete masonry. Top performance bit. Offers Best Footage Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 thread. 15/8 and up = Spline: 11/47 thread.

Diamond Products 05293 Core Bore 1 Premium Black $298.35 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete and masonry. Top performance bit. Offers Best Footage and Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 thread. 15/8 and up = Spline: 11/47 thread.

Diamond Products 05661 Core Bore 3 Premium Black $724.82 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concret masonry. Top performance bit. Offers Best Footage Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 thread. 15/8 and up = Spline: 11/47 thread.

Diamond Products 05709 Core Bore 3.5 Premium Black $803.79 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete masonry. Top performance bit. Offers Best Footage Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 thread. 15/8 and up = Spline: 11/47 thread.

Diamond Products 05843 Core Bore 5 Premium Black $1263.6 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete masonry. Top performance bit. Offers Best Footage and Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 Thread. 15/8 and up = Spline: 11/47 Thread.

Diamond Products 05607 Core Bore 2.5 Premium Black $563.36 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete masonry. Top performance bit. Offers Best Footage Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 thread. 15/8 and up = Spline: 11/47 thread.

Diamond Products 05984 Core Bore 8 Premium Black $2116.53 Core Bore Premium Black Diamond Core Bit. Use for coring conrete reinforced concrete masonry. Top performance bit. Offers Best Footage Speed. Core Length: 13 . 1/2 to 11/2 = Spline: 5/8 11 thread. 15/8 and up = Spline: 11/47 thread.

Diamond Products 05381 Core Bore 1.25 Premium Black $384.35 Diamond Products Premium Black core bits have a high diamond concentration for maximum footage and drilling speed. Designed for all types of wet drilling in applications with moderate to high steel.

Diamond Tech Core Drill Bit Set $89.95 Buy The Set And Save. Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Includes the four most commonly used drill bit sizes 1/8, 1/4, 3/8, and 1/2. Manufactured by Diamond Tech, this set should handle all your drilling needs.

3/8 Diamond Tech Core Drill Bit $30.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 3/8. Works with a standard electric drill and only needs water as a lubricant.

1/2 Diamond Tech Core Drill Bit $30.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/2. Works with a standard electric drill and only needs water as a lubricant.

1/8 Diamond Tech Core Drill Bit $24.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/8. Works with a standard electric drill and only needs water as a lubricant.

1/4 Diamond Tech Core Drill Bit $24.95 Unlike standard drill bits that simply put a hole in the glass, core bits actually remove a complete circle from the glass. Size 1/4. Works with a standard electric drill and only needs water as a lubricant.

Diamond Products 00012 Core Bore 2.5 Heavy Duty Orange Dry Hole Saw Bit for block and soft brick $398.39 Core Bore 2 Heavy Duty Orange Dry Diamond Core Bit / Hole Saw. For coring fast clean holes into brick and block. Core Length: 9 . Spline: 5/8 11 thread.

Diamond Products 00014 Core Bore 3.5 Heavy Duty Orange Dry Hole Saw Bit for block and soft brick $586.17 Core Bore 2 Heavy Duty Orange Dry Diamond Core Bit / Hole Saw. For coring fast clean holes into brick and block. Core Length: 9 . Spline: 5/8 11 thread.

Diamond Products 04745 Core Bore 4 Heavy Duty Orange Dry Hole Saw Bit for block and soft brick $621.27 Core Bore 2 Heavy Duty Orange Dry Diamond Core Bit / Hole Saw. For coring fast clean holes into brick and block. Core Length: 9 . Spline: 5/8 11 thread.

Diamond Products 00013 Core Bore 3 Heavy Duty Orange Dry Hole Saw Bit for block and soft brick $521.24 Core Bore 2 Heavy Duty Orange Dry Diamond Core Bit / Hole Saw. For coring fast clean holes into brick and block. Core Length: 9 . Spline: 5/8 11 thread.

Diamond Products 00011 Core Bore 2 Heavy Duty Orange Dry Hole Saw Bit for block and soft brick $368.55 Core Bore 2 Heavy Duty Orange Dry Diamond Core Bit / Hole Saw. For coring fast clean holes into brick and block. Core Length: 9 . Spline: 5/8 11 thread.

5mm Diamond Core Drill Bit $13.95 This drill bit is perfect for drilling holes in your art glass. Its small size makes holes large enough for wall hangings, but does not take away from the overall effect of the piece. Use it with the Dome Sconce Hardware Kit (item 627158) the Cone Sconce Hardware Kit (item 627160) and other installation kits and projects.

1/4 Gryphon Core Drill Bit $14.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/4 Core bit with 6mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.