Hole Saw Glass

Hole Saw Glass

Glass Mosaic Tile Art: How to Store Your Stained Glass

If you work with stained glass, you know what I’m talking about.  It seems like every room in the house and every table, dresser, bed, and desk has sheets of glass sitting on it collecting dust.  Stained glass clutters every open space everywhere.  One day, my wife had enough.  She said firmly, “Please clean up all this glass, I can’t stand it anymore.”  I responded, “Yes, dear.”  I thought about how I could store my glass without piling the sheets on top of each other, creating a stack two feet high.  That wouldn’t be good for the glass, especially those at the bottom of the pile, and it would be terribly inconvenient every time I needed a piece near the bottom.  Ideally, stained glass should be stored on its side, not piled on top of each other.  I didn’t want to spend a thousand bucks to buy a fancy rack system, and I don’t have the proper tools to build one myself.  So, what is a broke (i.e., no money) mosaic and stained glass artist to do when the wife says clean it up or throw it away?

I sat imagining the rack system at the local hobby store where I buy a lot of my stained glass.  It’s a beautiful thing.  Nice, neat shelves with the proper spacing to fit 12-inch by 12-inch sheets of glass, and dividers every two or three inches so the glass can rest on its edges lightly leaning to the side.  It truly is a thing of beauty.  Where can I get something like that without spending a fortune?  It suddenly hit me.  I dreamed up the perfect solution.

I went to my favorite home improvement store to see what kinds of ready-made cabinets are available.  I immediately saw the perfect piece.  It’s a slim five-shelf cabinet, about 10 inches wide and about four feet high.  The key is that it has adjustable shelves.  Two of those cabinets would give me plenty of room to store all my glass and provide lots of room to expand my stock.  The problem was that the piece is 10 inches wide.  I need each section to be about half that width to fit only a few pieces of glass and allow them to lean at a small angle.  How can I divide each 10-inch section into halves?  Again, it immediately hit me.

I remembered using thin pieces of metal for one of my many hair-brained house projects.  Each piece is about 12 inches long, 2 inches wide, and less than 1/8-inch thick so it easily bends with a little elbow grease.  Another good thing is that the metal pieces already had pre-drilled holes at each end.  I think the metal pieces are actually used in construction as a type of mending plate, but that didn’t stop me from using them for my latest crazy idea.  I figured I could attach two of these metal pieces to the bottom of each shelf to hang down, creating a divider upon which the glass could lean.  Perfect!  I bought two cabinets and a bunch of the metal strips.

I quickly assembled the first cabinet.  I used only two of the five adjustable shelves because I needed at least 13 inches between shelves.  With the bottom fixed shelf, these two adjustable shelves gave me a total of three shelves.  Remember, the key to this crazy idea is that the shelves must be adjustable.  To adjust the shelves on this cabinet, little holes are drilled into the side pieces of the cabinet into which little metal dowels are inserted.  Four dowels are inserted for each shelf at the right height, and then the shelf rests loosely on the four dowels.

For each shelf, I used two pieces of metal as a center divider, one piece toward the front and one piece toward the back.  I bent one end of the metal piece two inches from the end, creating a 90-degree L-shape.  The short 2-inch side is attached with two small screws to the bottom of each shelf so the longer 10-inch side hangs down, thereby creating the divider.  The metal pieces are thick enough to hold the glass without bending when the glass leans on the dividers, but thin enough to easily bend to make the L-shape.

Each shelf section now has two of these metal pieces hanging down in alignment as a divider, creating two 5-inch-wide sections on each shelf.  I assembled the second cabinet and installed the metal pieces the same way as the first cabinet.  The two cabinets rest side-by-side in my studio and neatly hold all my stained glass.  There’s enough room to store my glass not only by color, but also by texture.  All my glass is in one organized place now.  The rest of the house is glass-free, and the wife is very happy.  By the way, did I mention that I created this perfect glass storage system for less than $100?  Amazing what a little ingenuity can do.

About the Author

Bill Enslen has created glass mosaic art and mosaic table art for 30 years. His new ebook gives you step-by-step details for creating your own mosaic masterpieces. Visit his website and read the free sample chapters. Let him show you just how easy it is. With Bill's help, you can do it. Yes, you can!

Omni-2 Plus Wire Saw $384.95 Get 4 Free Bits. Stretch your budget with top-quality tools plus 4 free grinder bits. When you purchase this product by August 31st, 2012 Gryphon will send you 4 free grinder bits by mail. Download the special offer Claim Form for instruction on how to get your free bits. Now Better Than Ever. Cut in any direction and create intricate cuts and inside curves the easy way. Use the incredibly long-lasting round diamond-coated blade to make cuts in all directions on the 12 x 12 work surface. You can even make inside cuts easily by drilling a pilot hole in glass and passing the saw blade through the hole before cutting. Since the blade size is only .063 in diameter, you have greater flexibility cutting intricate shapes and narrow cut lines. Built-in automatic pump keeps saw cool and spotlight shines directly on your work, making it easier to see pattern lines and eliminating shadows. Features a 1/4 hp motor and includes 6 Turbo blades. Five year limited manufacturer warranty (excludes blades). All This Plus The Omni-2 Wire Saw Plus has a faster, more powerful motor to cut glass and other hard materials quickly. This motor is located on top, away from the water. The improved built-in automatic pump completely eliminates the need for fresh water reservoir and used water containers. The blades also have significantly longer life to save you money and time. Glass Craftsman Magazine Recommends Gryphon and 39;s Omni Wire Saw has a lot of winning ingredients, top of the list being affordable, long lasting diamond wire blades. We suggest you give the Omni a try first chance you get.

Taurus 3 Hole Reducers -24 Pack $4.95 Useful for both the underside of the Taurus 3 Ring Saw, where the blade exits for water reduction, and on the work surface for inhibiting debris form entering moving parts. 24 per pack.

Carbon Tuff Blade $30.95 Inland and 39;s CarbonTuff™ table saw blade is designed to cut most metals, including came for stained glass projects. Diameter 5 (125 mm) Arbor Hole 1/4 (12.7 cm)

38mm Diamond Coated Tile Glass Marble Hole Saw Drill Bit $8.2 Description:Professional 38mm Hole Saw for Cutting Glass Slate.Hardness gives the 38mm Glass Hole Saw the ability to cut through most materials, however, not designed to be used on wood or metal.Professional Tile Hole Saw is for superior cutting performance in tile, glass, slate and marble.Provides longer drilling life, faster and free machining action and more consistent performance.Metal shaft and tiny diamond particles coated tip of the Marble Hole Saw for strength and long lasting.Diamond Coated Hole Saw diameter: 38mmWeight: 36gPackage content:1 x Diamond Coated Hole Saw

40mm Tile Glass Marble Hole Saw Diamond Coated Drill Bit $9.2 Description:Professional 40mm Hole Saw for Cutting Glass Slate.Hardness gives the 40mm Glass Hole Saw the ability to cut through most materials, however, not designed to be used on wood or metal.Professional 40mm Tile Hole Saw is for superior cutting performance in tile, glass, slate and marble.Provides longer drilling life, faster and free machining action and more consistent performance.Metal shaft and tiny diamond particles coated tip of the Marble Hole Saw for strength and long lasting. Tile Hole Saw diameter: 40mmWeight: 46gPackage content:1 x Diamond Coated Hole Saw

Miter Saw Flanges $28.95 Saw flanges for the Gryphon Came Saw (item 84120). Used to support the blade.

Tile Marble 30mm Hole Saw Diamond Coated Glass Drill Bit $7.2 Description:Professional 30mm Hole Saw for Cutting Glass Slate.Hardness gives the 30mm Marble Hole Saw the ability to cut through most materials, however, not designed to be used on wood or metal.Professional Glass Hole Saw is for superior cutting performance in tile, glass, slate and marble.Provides longer drilling life, faster and free machining action and more consistent performance.Metal shaft and tiny diamond particles coated tip of the 30mm Tile Hole Sawfor strength and long lasting.Marble Hole Saw diameter: 30mmWeight: 29gPackage content:1 x Diamond Coated Hole Saw

Taurus 3 Separating Blade $84.95 The ultimate in cutting freedom. The Taurus 3 Ring Saw Separating Blade opens up so that you can make an inside cut in the middle of a piece of glass up to 11 in size. All you need to do is drill a hole anywhere on the piece of glass, open up your Separating Ring Blade while it is still in the saw, put it through the hole, rejoin the blade and cut. The addition of the Separating Blade increases the versatility of the Taurus Ring Saw and provides owners with another tool to expand their creative abilities by letting them cut intricate designs, shapes and patterns on the inside of a piece of glass just as quickly and easily as they can cut on the outside. The Separating Blade Kit comes with 2 orange grommets.

II.2 Separating Blade $89.95 The Ultimate in Cutting Freedom. The Taurus II.2 Ring Saw Separating Blade opens up so that you can make an inside cut in the middle of a piece of glass up to 11 in size. All you need to do is drill a hole anywhere on the piece of glass, open up your Separating Ring Blade while it is still in the saw, put it through the hole, rejoin the blade and cut. The addition of the Separating Blade increases the versatility of the Taurus Ring Saw and provides owners with another tool to expand their creative abilities by letting them cut intricate designs, shapes and patterns on the inside of a piece of glass just as quickly and easily as they can cut on the outside. The Separating Blade Kit comes with complete instructions, 3 yellow grommets and 4 red grommets.

Fiberboard Saw $4.95 Create your Own Drop Ring Molds. This handy saw makes cutting fiberboard smooth and easy. Includes comfort handle and durable blade.

Replacement Surface For Chop Saw $27.95 Replacement cutting surface for Power Miter II Chop Saw.

Jewelry Saw Blades $6.95 A good inexpensive blade for the novice and hobbyist. Use with jewelry saw 69780.

X-acto Razor Saw $9.95 Cut zinc, copper and brass came easily and accurately with this precision razor saw. Features adjustable handle and fine-tooth blade. Saw and mitre sold separately (see item 7159).

Apollo Ring Saw $949.95 Three Saws in One. Combining the best features of precision cutting ring saw technology with traditional tile saw concepts in a revolutionary design, the Apollo takes your ability to transform glass and tile into any shape to new heights. Make straight cuts up to 16 diagonally, slice through materials up to 3 thick and create intricate shapes even in thick tile all with one saw. Advantages of the Apollo Ring Saw Change blades quickly and easily with self contained blade cartridges. Quick and easy set up Grinds as it cuts producing smooth edges Smooth glide work surface and guides make straight cuts a cinch Powerful motor delivers 10 times the torque of a standard tile saw for fast, clean cuts Note Blade cartridges sold separately. Also available in 220/240V version. Click Here for pricing and information.

Taurus 3 Ring Saw $369.95 Everything You Want in a Ring Saw The most popular ring saw in glass. The improved model from Taurus features a 1/5 HP motor, 5-3/4 multi-directional blade and weighs only 14 pounds. Advantages of the Taurus 3 Ring Saw -- Amazing Portability the saw snaps out of its reservoir turning it into a hand-held saw so you can make cuts anywhere -- Quieter half the noise of older models -- Bigger Work Surface 17-3/4 x 16 with 5-5/8 throat depth -- Built-in spotlight and flip-up face shield -- Simpler less maintenance and easier cleaning -- Grinds as it cuts. -- New Includes instructional DVD and blade stabilizer -- Three year warranty (excluding blades) Also available in 220/240V version. Click Here for pricing and information.

II.2 Complete Blade And Parts Kit $139.95 Here are all the parts and the blade you need for the Taurus II.2 Ring Saw in one handy package and with great savings. Kit includes standard blade, drive belt, R4 bearing, 5 R2 bearings, raceway, 6 red gear grommets, 3 yellow groove grommets, 2 hole reducing plugs, 3 M3 screws.

Power Miter Came Saw $99.95 Slice through tough zinc and other metal cames with this tabletop power saw. It makes framing stained glass projects more accurate, easier, and quicker than cutting each piece by hand. Cuts perfect mitres on zinc, copper, or brass came in seconds. Standard equipment includes medium duty circular blade, special chip deflecting eye shield, blade guard, and a mitre-cutting guide. This portable and compact table saw measures 5-1/2 x 7-1/2. One year manufacturer warranty. Also available in 220/240V version. Click Here for pricing and information.

Makita 714002-A 5/8-in Hole Saw $3.99 5/8-in Hole Saw - 714002-A

Gryphon Came Saw Blade $14.95 This standard abrasive blade for the Gryphon Came Saw was designed to cut hard metals, and is ideal for cutting zinc, brass and copper came. Make short work of zinc or steel rebar as well. The thin profile of the blade produces clean, fast cuts.

Jewelry Saw $7.95 Design possibilities increase with your skills to cut your own designs from metal. Made of high-grade steel with a comfortable hardwood handle blades are held perfectly straight for accurate cutting. Because it is one piece it will maintain consistent tension.

Zephyr Ring Saw $393.95 Get 4 Free Bits. Stretch your budget with top-quality tools plus 4 free grinder bits. When you purchase this product by August 31st, 2012 Gryphon will send you 4 free grinder bits by mail. Download the special offer Claim Form for instruction on how to get your free bits. The Zephyr Ring Saw Includes More Than Ever Before. Make cuts in all directions with the quiet, smooth, easy-to-operate Gryphon Zephyr. Cut glass, tile, ceramics and stone up to 1-1/2 thick on the large 17-1/2 x 17-1/2 work surface. Features a deep 6-5/8 throat and diamond coated 7 round blade. Best of all, the saw and 39;s bearings and wheels are shielded to protect them from glass dust, extending the life of these critical parts. The motor/ blade assembly can be easily detached, creating a hand-held saw that can be used to cut anywhere (see image below). Overall dimensions 18 x 18 x 11. Three year manufacturer warranty (excludes replaceable parts). With available specialty blades you can create cuts for all your designs with ease. Fine blade 84107 provides a smooth cut on even delicate materials such as dichroic and iridescent glass. Use the separating blade 84132 to make inside cuts with no leader path (see image below). Also available in 220/240V version. Click Here for pricing and information.

Apollo Ring Saw - International Voltage $1049.95 Three Saws in One. Combining the best features of precision cutting ring saw technology with traditional tile saw concepts in a revolutionary design, the Apollo takes your ability to transform glass and tile into any shape to new heights. Make straight cuts up to 16 diagonally, slice through materials up to 3 thick and create intricate shapes even in thick tile all with one saw. Advantages of the Apollo Ring Saw Change blades quickly and easily with self contained blade cartridges. Quick and easy set up Grinds as it cuts producing smooth edges Smooth glide work surface and guides make straight cuts a cinch Powerful motor delivers 10 times the torque of a standard tile saw for fast, clean cuts This tool is designed just for our international customers. This item uses international voltage of 220/240V, common in Europe and other parts of the world, but will not work with North American electrical outlets. For the standard American voltage product Click Here .

Gryphon Came Saw $239.95 Get 4 Free Bits. Stretch your budget with top-quality tools plus 4 free grinder bits. When you purchase this product by August 31st, 2012 Gryphon will send you 4 free grinder bits by mail. Download the special offer Claim Form for instruction on how to get your free bits. A Delphi Workshop Favorite. The Gryphon Miter saw is particularly well suited for making repeat, precise miter cuts in thin wall extrusions of brass, zinc, steel and copper. Make accurate repeat cuts up to 45° in either direction on the saws large 13 x 15 adjustable table with protractor scale. A Thumbscrew clamp holds work securely to the fence while cutting and a built-in blade shield keeps fingers safe. The ultra-thin abrasive blade coupled with the 1.1 hp motor produces clean and fast cuts. One year manufacturer warranty. Glass Craftsman Magazine Recommends A versatile, well made machine. Once you use it, you and 39;ll wonder how you got along without it.

Zephyr Ring Saw - International Voltage $399.95 Get 4 Free Bits. Stretch your budget with top-quality tools plus 4 free grinder bits. When you purchase this product by August 31st, 2012 Gryphon will send you 4 free grinder bits by mail. Download the special offer Claim Form for instruction on how to get your free bits. Get the Benefits of a Ring Saw with Minimal Maintenance Make cuts in all directions with the quiet, smooth, easy-to-operate Gryphon Zephyr. Cut glass, tile, ceramics and stone up to 1-1/2 thick on the large 17-1/2 x 17-1/2 work surface. Features a deep 6-5/8 throat and diamond coated 7 round blade. Best of all, the saw and 39;s bearings and wheels are shielded to protect them from glass dust, extending the life of these critical parts. The motor/ blade assembly can be easily detached, creating a hand-held saw that can be used to cut anywhere (see image below). Overall dimensions 18 x 18 x 11. Three year manufacturer warranty (excludes replaceable parts). This tool is designed just for our international customers. This item uses international voltage of 220/240V, common in Europe and other parts of the world, but will not work with North American electrical outlets. For the standard American voltage product Click Here .

Bead Hole Cleaner - Fireworks $4.95 The Fireworks Bead Hole Cleaner is coated with the finest diamond abrasive for a more effective and efficient removal of bead release residue. To use, simply push the narrow diamond coated rod back and forth through the hole in your bead.

Gryphon Came Saw Toothed Blade $21.95 Use this fine toothed blade with your Gryphon Came Saw to cut even more materials with amazing precision. Designed specifically for soft metals, plastic and wood, this blade will produce clean, splinter free cuts in framing stock and more.

3-1/2 Circle Bevel With Hole $2.55 Lightweight beveled glass ornaments are perfect for holiday decoration and gift giving. Decorate by etching, painting, or staining. Circles are 3-1/2 in diameter and only 1/8 thick. Hang on the tree, top a special gift package, or hang in your favorite window as a suncatcher. Bevel has hole for easy hanging and is polished to insure clarity.

Inland Swap Top Tile Saw $174.95 The SwapTop Tile Saw is the all purpose, full-size, full feature table saw for all your tile, ceramic, and hobby projects. It and 39;s able to professionally handle large scale projects but precise enough for fine detail work. Imagine cutting tile, ceramic, stone, marble, and mosaic on the same saw that can also cut wood, wood composites, plastics, soft metals, and more. The Aluminum surface is sturdier, longer lasting and won and 39;t corrode when used wet. With the included fence you make more accurate cuts so projects will fit better. The large 10 x 12 work surface provides plenty of work space for your larger projects while taking up a small portion of your work bench. No hassle product assembly and changing blades takes only minutes. Operation is easy and straight forward. Use wet or dry. The SwapTop Tile Saw quickly and easily converts to a wet or dry shaping tool. The motor is encased in a cleverly designed base that allows it to operate with the motor shaft either vertically or horizontally. You can add the other option whenever you want by purchasing the Router/Shaper Conversion Kit 10655. The SwapTop Tile Saw does the work of several individual machines at a fraction of the cost and frees up your work space. Also available in 220/240 Voltage Product available in 220/240V for our international customers. Click Here for pricing and information.

Taurus 3 Ring Saw - International Voltage $524.95 Everything You Want in a Ring Saw The most popular ring saw in glass. The improved model from Taurus features a 1/5 HP motor, 5-3/4 multi-directional blade and weighs only 14 pounds. This tool is designed just for our international customers. This item uses international voltage of 220/240V, common in Europe and other parts of the world, but will not work with North American electrical outlets. For the standard American voltage product Click Here . Advantages of the Taurus 3 Ring Saw -- Amazing Portability the saw snaps out of its reservoir turning it into a hand-held saw so you can make cuts anywhere -- Quieter half the noise of older models -- Bigger Work Surface 17-3/4 x 16 with 5-5/8 throat depth -- Built-in spotlight and flip-up face shield -- Simpler less maintenance and easier cleaning -- Grinds as it cuts. -- New Includes instructional DVD and blade stabilizer -- Three year warranty (excluding blades) -- Standard European Plug -- 220/240 Voltage

Ring Saw Replacement Blade $39.95 MasterCraft seamless, stainless steel diamond coated replacement blade for the Tarurus 3 and Taurus II.2 ring saws. A multi-directional blade to cut glass in all directions. Grommets sold separately. The additional image below shows the close up diamond grit coating which surrounds the blade to allow cutting from any direction.

Gryphon Omni-2 Wire Saw Blade Guide Set $9.95 Keep your saw and your blade in peak performance by regularly replacing worn blade guides. Use with Gryphon Omni-2 Wire Saws (item 84410). Pack of two.

Inland Swap Top Came Saw - International Voltage $158.95 This tool is designed just for our international customers. The SwapTop Came Saw is the all purpose, full-size, full feature table saw for all your stained glass, and hobby projects. It and 39;s able to professionally handle large scale projects but precise enough for fine detail work. Imagine cutting metal cames including zinc and copper, plastics, and some woods on a saw that can also cut tile, ceramics, glass, stone, and more. The Aluminum surface is sturdier, longer lasting and won and 39;t corrode when used wet. With the included fence you make more accurate cuts so projects will fit better. The large 10 x 12 work surface provides plenty of work space for your larger projects while taking up a small portion of your work bench. Product assembly and changing blades takes only minutes. Operation is easy and straightforward. Use wet or dry. The SwapTop Came Saw quickly and easily converts to a wet or dry shaping tool with the Router/Shaper Converson Kit 10655. The motor is encased in a cleverly designed base that allows it to operate with the motor shaft either vertically or horizontally. You can add the other option whenever you want by purchasing the conversion kit 10655. The SwapTop Came Saw does the work of several individual machines at a fraction of the cost and frees up your work space. This item uses international voltage of 220/240V, common in Europe and other parts of the world, but will not work with North American electrical outlets. For the standard American voltage product Click Here .

Inland Swap Top Trim Saw Conversion Kit $78.93 Save money and space by converting your SwapTop 8 Flat Lap grinder (item 10880) into a table saw too. This complete kit includes all the accessories to make your SwapTop the most versatile tool on your workbench. Cut glass, ceramic tile, marble and stone, up to 1/4 thick with precision. The included 6-1/2 DiamondCut blade makes clean, straight cuts. Image shown with optional rip fence accessory.

Rectangle Hole Pot Melt $15.95 An Excellent Way to Use Up Scrap Glass Stack your fusible scrap glass into this exclusive pot melt mold to create dramatic one-of-a-kind marbled glass. Place the mold on top of kiln posts and dams inside the kiln. Once hot, the glass will flow out of this mold and onto a kiln shelf that you place below. Durable ceramic molds measures 6-1/2 wide by 2-1/2 deep. Includes Delphi Tips and instruction sheet. Click on View Product Video to learn more about setting up your pot melt. A Delphi Exclusive. See how it works (images below) 1. On a level, kiln washed shelf, elevate the Pot Melt Mold on a combination of kiln posts and dams, making sure the hole(s) in the mold are unobstructed. 2. Fill your mold with compatible fusible glass. 3. Fuse, making sure that your glass reaches the maximum temperature to enable the molten glass to flow out of the mold leaving behind as little glass as possible helping to prevent the mold from thermal shocking. 4. Display your one-of-a-kind pot melt creation, or continue creating by slumping, cold-working, or cutting up your pot melt to use in other fused projects. For complete instructions and tips click View User Manual. Tips on Using Pot Melt Molds Make sure the kiln shelf you use is pre-washed, completely dry and level in your kiln. Experiment using different slumping molds instead of kiln shelves to melt glass onto. The glass will take the shape and texture of the mold you choose. There is no way to get all of the glass out of the mold. However if you layer clear in the bottom first with your colors on top you and 39;ll have less mixing of colors when you do a new project. Not intended for use in table top kilns. Project below by Delphi Artist Val Oswalt.

Single Hole Pot Melt $15.95 An Excellent Way to Use Up Scrap Glass Stack your fusible scrap glass into this exclusive pot melt mold to create dramatic one-of-a-kind marbled glass. Place the mold on top of kiln posts and dams inside the kiln. Once hot, the glass will flow out of this mold and onto a kiln shelf that you place below. Durable ceramic molds measures 6-1/2 wide by 2-1/2 deep. Includes Delphi Tips and instruction sheet. Click on View Product Video to learn more about setting up your pot melt. A Delphi Exclusive. See how it works (images below) 1. On a level, kiln washed shelf, elevate the Pot Melt Mold on a combination of kiln posts and dams, making sure the hole(s) in the mold are unobstructed. 2. Fill your mold with compatible fusible glass. 3. Fuse, making sure that your glass reaches the maximum temperature to enable the molten glass to flow out of the mold leaving behind as little glass as possible helping to prevent the mold from thermal shocking. 4. Display your one-of-a-kind pot melt creation, or continue creating by slumping, cold-working, or cutting up your pot melt to use in other fused projects. 4. Display your one-of-a-kind pot melt creation, or continue creating by slumping, cold-working, or cutting up your pot melt to use in other fused projects. For complete instructions and tips click View User Manual. Tips on Using Pot Melt Molds Make sure the kiln shelf you use is pre-washed, completely dry and level in your kiln. Experiment using different slumping molds instead of kiln shelves to melt glass onto. The glass will take the shape and texture of the mold you choose. There is no way to get all of the glass out of the mold. However if you layer clear in the bottom first with your colors on top you and 39;ll have less mixing of colors when you do a new project. Not intended for use in table top kilns. Projects below by Delphi Artist Val Oswalt.

Power Miter II Chop Saw $199.95 Cuts Came Safely and Easily. Want to eliminate sloppy came joints, or use more brass came in your work, but hand-cutting each piece of came just takes too much time? Then the Power Miter II Chop Saw is for you. Built for the professional, it and 39;s safe, reliable, and easy to use. The 4 blade easily adjusts to any angle between 45° and 90° for perfect fitting hexagons, octagons, etc. The powerful 1/5 hp motor turns the fine tooth blade (cuts lead, zinc, copper and brass came) leaving cames smooth and ready for panel assembly. Safety features include and automatic shutoff switch and blade guard. Includes full 3-year warranty. Also available in 220/240V version. Click Here for pricing and information.

Power Miter Came Saw - International Voltage $119.95 This tool is designed just for our international customers. Slice through tough zinc and other metal cames with this tabletop power saw. It makes framing stained glass projects more accurate, easier, and quicker than cutting each piece by hand. Cuts perfect mitres on zinc, copper, or brass came in seconds. Standard equipment includes medium duty circular blade, special chip deflecting eye shield, blade guard, and a mitre-cutting guide. This portable and compact table saw measures 5-1/2 x 7. One year manufacturer warranty. This tool is designed just for our international customers. This item uses international voltage of 220/240V, common in Europe and other parts of the world, but will not work with North American electrical outlets. For the standard American voltage product Click Here .

3 Circle Bevel With Hole $1.95 This bevel has a 1/8 beveled edge. Great for etching. The pre-drilled hole makes it a quick and easy gift idea. Buy More and Save. Receive a quantity price break when you buy 30 or more of the same style bevel. The more you buy, the more money you save.

4 Circle Bevel With Hole $2.25 This bevel has a 1/8 beveled edge. Great for etching. The pre-drilled hole makes it a quick and easy gift idea. Buy More and Save. Receive a quantity price break when you buy 30 or more of the same style bevel. The more you buy, the more money you save.