Masonry Bit

Masonry Bit

Types Drill Bits You Can Choose From

Many a time when you are stuck during drilling a hole, you need a specific bit to get the job done. Let's understand the types of drill bits designed for specific purposes.

Adjustable bit: comes with an adjustable cutter to bore holes of varying sizes. Used for drilling holes for piping or wiring where a rough cut is acceptable.

Around-the-corner bit: to cut curved holes in tight corners with an angled cutting surface.

Auger Bits: designed to drill holes in wooden material. The drilling end has a screw head so that the bit can self feed.

Brad-point drills: similar to standard bits but have a sharpened point that makes it easier to start in wood. Drills cleaner holes than a spade bit.

Counterbore: a drill bit which permits a screw to be driven beneath the woods surface. The hole can then be filled with a plug.

Countersink bit: has an angled tip that's designed to form a depression for screw heads.

Drill Saw bit: Used to cut holes in metal and wood. Can enlarge existing holes.

Expansion bit: another term for adjustable bit. An expansion bit uses an adjustable cutter to bore holes of varying sizes.

Fly Cutter: used on a drill press to cut circles. The diameter of the circles can be adjusted by changing the cutter setting.

Forstner Bit: used to a create a flat bottomed hole in wood, a mortise can be formed by cutting overlapping holes. Also used to a create a segment of a hole at the edge of a board. Use only in a drill press.

Glass bit: has a carbide tip for drilling through glass.

Hole saws: cuts holes from 1" to 6" in diameter, have a center bit for guiding the cutting edge of the saw.
Masonry bits: have carbide tips for drilling holes in masonry, use at speeds below 400rpm.

MultiSpur bit: drills holes large enough to run pipe or conduit through. A threaded screw in the center of the cutting circle pulls the work towards the cutting edge.
Nail Spinner: used to start finishing nails, prevents wood from splintering as it is driven in. A hammer is used to finish the job.

Reamer Bit: a tapered bit that can be used to fit into an existing hole either to enlarge it.

Rotary Files: used for the same purpose as a conventional file, great for expanding holes in metal and cleaning up rough edges.

Paint Mixers: consist of a shaft with fan type blades. Put the shaft into the paint before rotating to avoid splatter.

Plastic Bit: has a tip that prevents splintering when drilling in plastic. Drill slowly and reduce pressure as you reach the other side of you work.

Plug Cutter: can be used to cut out cylindrical shapes from wood. These small cylindrical plugs are used to cover screw heads. This bit should only be used in drill press.

Screw driving bits: used for driving screws.
Screw Pilot bit: used to drill a pilot hole, body hole and countersink all at the same time.

Spade bit: has a sharpened point and used for drilling large diameter holes in wood. These bits work best at fast drilling speeds, but remember to start slowly.

Step Bit: a tapered bit with up to 13 diameters as the bit penetrates the work it drills a hole with an increasingly large diameter.

Twist drills: standard drill bits, used for drilling small diameter holes in wood and metal.

Wire Brushes: used to clean up metal, remove rust. Available as either a cup or a wheel with wire brush on the rim.

Woodscrew bit: available in a variety of sizes to match particular screw sizes. Woodscrews are used to drill a pilot hole, body hole and countersink all at the same time.

About the Author

If you need to know more information about drill bit types, then visit our site completely devoted to drill bits.

Lindemann 601714 Malco .25 Inch Masonry Bit $26.62 Masonry Drill Bit is used for drilling holes for masonry anchors or screws. Size: 1/4 . High quality components. Satisfaction ensured.

DEWALT DW2571 3-Piece Rotary Masonry Drill Bit Set $15.99 3-Piece Rotary Masonry Drill Bit Set - DW2571. 5/32" Rotary Masonry Drill Bit. 3/16" Rotary Masonry Drill Bit. 1/4" Rotary Masonry Drill Bit

Irwin Irwin 5 16x13 Masonry Bit 5026008 $5.3 5/16x13 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 5/16? diameter bit, 1/4? diameter shank, 13? long Brand #: Irwin 5026008 UPC: 024721029157 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 8x4 Masonry Bit 5026009 $2.98 3/8x4 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 3/8? diameter bit, 3/8? diameter shank, 4? long Brand #: Irwin 5026009 UPC: 024721029034 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 8x13 Masonry Bit 5026011 $6.3 3/8x13 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 3/8? diameter bit, 3/8? diameter shank, 13? long Brand #: Irwin 5026011 UPC: 024721029164 Keywords: bit masonry drill carbide tip

Irwin Irwin 7 16x6 Masonry Bit 5026012 $3.98 7/16x6 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 7/16? diameter bit, 3/8? diameter shank, 6? long Brand #: Irwin 5026012 UPC: 024721028990 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 2x6 in Masonry Bit 5026015 $5.53 1/2x6? masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 1/2? diameter bit, 3/8? diameter shank, 6? long Brand #: Irwin 5026015 UPC: 024721029089 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 2x13 Masonry Bit 5026016 $8.28 1/2x13 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 1/2? diameter bit, 3/8? diameter shank, 13? long Brand #: Irwin 5026016 UPC: 024721029188 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 8x6 Masonry Bit 5026019 $6.73 5/8x6 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 5/8? diameter bit, 3/8? diameter shank, 6? long Brand #: Irwin 5026019 UPC: 024721029003 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 8x13 Masonry Bit 5026020 $9.92 5/8x13 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 5/8? diameter bit, 3/8? diameter shank, 13? long Brand #: Irwin 5026020 UPC: 024721029195 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 4x6 Masonry Bit 5026021 $10.05 3/4x6 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 3/4? diameter bit, 3/8? diameter shank, 6? long Brand #: Irwin 5026021 UPC: 024721029041 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 4x13 Masonry Bit 5026022 $15.9 3/4x13 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 3/4? diameter bit, 3/8? diameter shank, 13? long Brand #: Irwin 5026022 UPC: 024721029201 Keywords: bit masonry drill carbide tip

Irwin Irwin 1x6 Masonry Bit 5026023 $14.3 1x6 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 1? diameter bit, 1/2? diameter shank, 6? long Brand #: Irwin 5026023 UPC: 024721029133 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 8x3 Masonry Bit 5026000 $1.33 1/8x3 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 1/8? diameter bit, 1/8? diameter shank, 3? long Brand #: Irwin 5026000 UPC: 024721029065 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 32x3 Masonry Bit 5026001 $1.37 5/32x3 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 5/32? diameter bit, 5/32? diameter shank, 3? long Brand #: Irwin 5026001 UPC: 024721029010 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 16x4 Masonry Bit 5026002 $1.46 3/16x4 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 3/16? diameter bit, 3/16? diameter shank, 4? long Brand #: Irwin 5026002 UPC: 024721029058 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 4x4 Masonry Bit 5026003 $1.61 1/4x4 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 1/4? diameter bit, 1/4? diameter shank, 4? long Brand #: Irwin 5026003 UPC: 024721029072 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 4x13 Masonry Bit 5026005 $4.59 1/4x13 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 1/4? diameter bit, 1/4? diameter shank, 13? long Brand #: Irwin 5026005 UPC: 024721029140 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 16x4 Masonry Bit 5026006 $2.11 5/16x4 masonry bit Tungsten carbide tips For drilling concrete, masonry, brick, tile, slate, and plaster Use only in rotary drills 5/16? diameter bit, 1/4? diameter shank, 4? long Brand #: Irwin 5026006 UPC: 024721029027 Keywords: bit masonry drill carbide tip

Lindemann 601707 Malco 3 16 Inches Masonry Bit $25.69 Masonry Drill Bit is used for drilling holes for masonry anchors or screws. Size: 3/16 . High quality components. Satisfaction ensured.

Irwin Industrial Tool .75in. X 13in. Masonry Drill Bit 5026022 $20.77 Masonry bit. For drilling concrete masonry brick tile and plaster. Use only in rotary drills. Tungsten carbide tip. 13 long.75 diameter bit. Carded

Irwin Irwin 5pc Masonry Bit Set 5026024 $14.51 5pc masonry bit set Includes 1 each model No. 14003 (3/16?), 14004 (1/4?), 14005 (5/16?), 14006 (3/8?), and 14008 (1/2?) in a molded plastic case Brand #: Irwin 5026024 UPC: 024721029539 Keywords: masonry drill bit 5pc w case

Irwin Industrial Tool .25in. X 13in. Masonry Bit 5026005 $25.69 Masonry bit. For drilling concrete masonry brick tile and plaster. Use only in rotary drills. Tungsten carbide tip.25 diameter shank. 13 long.25 diameter bit. Carded

Irwin Industrial Tool .50in. X 13in. Masonry Drill Bit 5026016 $28.46 Masonry bit. For drilling concrete masonry brick tile slate and plaster. Use only in rotary drills. Tungsten carbide tips.38 diameter shank. 13 length.50 diameter bit

Irwin Industrial Tool .31in. X 13in. Masonry Drill Bit 5026008 $26.42 Masonry bit. For drilling concrete masonry brick tile slate and plaster. Use only in rotary drills. Tungsten carbide tips.25 diameter shank. 13 long. 5/16 diameter bit. Carded

Irwin Irwin 3 4x6 Masonry Bit 326022 $13.91 3/4x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 3/4? x 6? Brand #: Irwin 326022 UPC: 024721009265 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 16x6 Masonry Bit 326009 $3.01 5/16x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 5/16? x 6? Brand #: Irwin 326009 UPC: 024721008862 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 16x12 Masonry Bit 326010 $7.72 5/16x12 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 5/16? x 12? Brand #: Irwin 326010 UPC: 024721008930 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 8x6 Masonry Bit 326011 $4.5 3/8x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 3/8? x 6? Brand #: Irwin 326011 UPC: 024721008978 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 8x12 Masonry Bit 326012 $8.74 3/8x12 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 3/8? x 12? Brand #: Irwin 326012 UPC: 024721008985 Keywords: bit masonry drill carbide tip

Irwin Irwin 7 16x6 Masonry Bit 326014 $3.98 7/16x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 7/16? x 4? Brand #: Irwin 326014 UPC: 024721009012 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 2x6 Masonry Bit 326015 $6.45 1/2x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 1/2? x 6? Brand #: Irwin 326015 UPC: 024721009043 Keywords: bit masonry drill carbide tip

Irwin Irwin 1 2x12 Masonry Bit 326016 $10.19 1/2x12 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 1/2? x 12? Brand #: Irwin 326016 UPC: 024721009203 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 8x6 Masonry Bit 326019 $8.28 5/8x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 5/8? x 6? Brand #: Irwin 326019 UPC: 024721009234 Keywords: bit masonry drill carbide tip

Irwin Irwin 5 8x12 Masonry Bit 326020 $11.91 5/8x12 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 5/8? x 12? Brand #: Irwin 326020 UPC: 024721009241 Keywords: bit masonry drill carbide tip

Irwin Irwin 3 4x12 Masonry Bit 326023 $16.33 3/4x12 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 3/4? x 12? Brand #: Irwin 326023 UPC: 024721009272 Keywords: bit masonry drill carbide tip

Irwin Irwin 7 8x6 Masonry Bit 326024 $15.89 7/8x6 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 7/8? x 6? Brand #: Irwin 326024 UPC: 024721009289 Keywords: bit masonry drill carbide tip

Irwin Irwin 7 8x13 Masonry Bit 326025 $18.16 7/8x13 masonry bit For use in hammer drills and standard rotary drills Carbide tipped for maximum wear resistance and capacity to withstand high-impact Slotted tip for faster chip removal Black oxide coating for extra durability and corrosion resistance 7/8? x 12? Brand #: Irwin 326025 UPC: 024721009302 Keywords: bit masonry drill carbide tip