Plus Rotary Hammer
Plus Rotary Hammer
 |
US $250.00
Concrete Construction Tools and Services
The diversity of high risk activity is present in buildings and construction industries. To prevent deaths, injuries and illness, the hazard that construction people are facing must be managed.
The construction industry employs skilled workers who build various infrastructures or buildings. Their work includes erection, construction, extension and structural alteration.
Other construction services include:
? Site preparation
? Excavation and landscaping work done in connection with construction work.
? Installation or assembly of pre-fabricated components used in construction work
? Separation of a structure or part of a structure into its pre-fabricated components
? Demolition work or asbestos removal work
In almost all of the above services, concrete is used in one way or another. Appropriate tools and equipment must be utilized when concrete. Here are different kinds of tools and equipment used for working with concrete:
1. AIR CONCRETE CHAIN SAW WITH DIAMOND CHAIN 11" BAR AND CHAIN
Category: Concrete Chain Saws
• Cut with speed, portability and ease through Reinforced Brick, Concrete, Block, Natural Stone and Concrete Pipe.
• Designed for cutting through walls, floors and columns in a single pass
2. DRY DIAMOND CORE DRILLING MACHINE - One Speed
Category: Core Drills
• Lightweight and compact core drill for holes that are up to approximately 3 1/4" in limestone, brick, cinder blocks as well as other types of abrasive materials
• The slip clutch is used to protect the operator in case of jamming.
3. HIGH SPEED GENERAL PURPOSE BLADES (Cured Concrete)
• Designed for contractors using a hand held, high speed saw
• For general construction and other emergency style sawing of concrete.
• Can be wet or dry
4. AIR ROTARY HAMMER DRILLS - SDS PLUS
Category: Hammer Drills
• 1" BIT capacity for drilling concrete and masonry uses SDS - Plus
• Shank drill bits holes up to 1" diameter with solid carbide tipped bits
• Up to 3" diameter with carbide core bits
5. ALUMINUM HAND HELD GROOVER (12")
Category: Czar Weld Hand Tools
• 1/8" 6061 aircraft aluminum lightweight only 2 lbs. float size.
• 8" x 12" blade size 7 ½" x 1 1/8" deep x 3/8" radius replaceable blade float size provides wider flatter surface area.
paint, glue, tile cement, drywall. mud and other materials in small. batches up to 50 lbs
6. MIXER HER 14.1S with VARIABLE SPEED - The lightweight mixer with high torque
• Excellent for use by painters, tillers and contractors for mixing paint, tile cement, glue, drywall mud and other material in small quantities of up to 50 lbs.
7. TIGER EQUIPMENT FLOOR SAW MINI 1
Category: Saws
• The Sturdi Saws are the most durable and easily maintained push saws available.
8. 8" HEAVY DUTY FLOOR SCRAPER WITH 5 FOOT ERGONOMIC HANDLE PLUS 20 8" SPARE BLADES
Category: Surface Prep Tools
• Heavy duty head with 4 screws
• Head is cast and heat-treated, carbon steel
• General large area clean up
• Head fits all other handles
• EZ to use large rub
9. BOX OF 100 BLADES - 4 inches
Category: Surface Prep Tools
• for use with HS 0105, HS0125, HS 0125ERG, 4" Scrapers
10. HC 175 - 5 HIGH CYCLE VIBRATOR WITH 1 ¾" HEAD
Category: High Cycle Vibrators and Generators
• Bearing less air motor in head vibrators
• 1 ¾" head with 5' handling hose and 25' switch and cable assembly.
Here are more concrete construction tools:
• Concrete Tamp - used to compress the concrete mix.
• Bull float - used to level the exterior of concrete, sealing tangible from moisture lose.
• Fresno - are intended for adding long extension handles so they don't have to walk out on the slab. They fast work over big areas but do not attain the same degree of compaction.
• Floats - level ridges, fill voids, and smooth the surface in preparation for troweling. Floats can also be applied to work in dry-shake color hardeners. A float pastes on the surface by means of pushing down the coarse aggregate.
• Walking Edger Tool - forms the edges of concrete to a smooth rounded edge.
• Jointer Tool (also called as Grover) - used to section concrete to control from cracking.
• Magnesium Floats Tool - level concrete to accessible concrete and forms.
• Steel Trowel Tool - used to smooth and seal concrete to a polished finish.
• Straight edges - strike off freshly placed concrete and make it as level as possible before finishing.
• Concrete Broom - used to uniform the concrete onto a non-slip textured exterior.
• Concrete Boots and Gloves - defense from harsh elements.
Concrete is not only for tools. It is also used for different services. One you see along the road is the concrete driveways. It should be a minimum of six inches long. In addition, concrete sidewalks should be a minimum of four inches long. Always maintain this four inches grade throughout the sidewalk to prevent it from cracking.
About the Author
For more information on
Concrete Tools
please visit our website.
|
|
Bosch T3934 SDS-plus Rotary Hammer Core Guide Plate Bit $6.99 SDS-plus Rotary Hammer Core Guide Plate Bit - T3934 |
|
|
Bosch T3926 SDS-plus Rotary Hammer Core Centering Pin Bit $17.99 SDS-plus Rotary Hammer Core Centering Pin Bit - T3926 |
|
|
Bosch HA1030 SDS-max to SDS-plus Rotary Hammer Adapter $59.99 SDS-max to SDS-plus Rotary Hammer Adapters - HA1030 |
|
|
Makita HR2475 1-in SDS-Plus Rotary Hammer $239.99 1-in SDS Rotary Hammer - HR2475. Side handle - 158057-6. Depth guage - 324219-0. Plastic tool case - 824695-3 |
|
|
Bosch RH328VC 1-1/8-in SDS-plus Rotary Hammer $269.99 1-1/8-in SDS-plus Rotary Hammer - RH328VC. Auxiliary Handle - 2 602 025 112. Depth Gauge - 1 613 001 008. Carrying Case - 2 605 438 482 |
|
|
Bosch RH432VCQ 1-1/4-in SDS-plus Quick-Change Rotary Hammer $399.99 1-1/4" SDS-plus Quick-Change Rotary Hammer - RH432VCQ. Auxiliary Handle. Carrying Case |
|
|
DEWALT D25404K 1-1/8-in SDS-plus Rotary Hammer Kit $349.99 1-1/8" SDS-plus Rotary Hammer Kit - D25404K. 360° Side Handle. Depth Rod. Kit Box |
|
|
Factory Reconditioned DEWALT D25404KR 1-1/8-in SDS-plus Rotary Hammer Kit $289.99 1-1/8" SDS-plus Rotary Hammer Kit - D25404KR. 360° Side Handle. Depth Rod. Kit Box |
|
|
Bosch RH328VCQ 1-1/8-in 120V SDS-plus Quick-Change Rotary Hammer $319.99 1-1/8-in 120V SDS-plus Quick-Change Rotary Hammer - RH328VCQ. Auxiliary Handle. Carrying Case |
|
|
Metabo 600224420 KHE-D28 1-1/8-in SDS-plus Rotary Hammer $301.5 KHE-D28 1-1/8-in SDS-plus Rotary Hammer - 600224420. Side Handle - 314000770. Depth Gauge - 627288000. Carrying Case - 344452610 |
|
|
Hitachi DH24PF3 7 Amp 15/16-in SDS Plus Rotary Hammer $169.99 7.0 Amp 15/16-in SDS Plus Rotary Hammer - DH24PF3. Depth Gauge. Side Handle. Carrying Case |
|
|
Metabo 600223420 KHE-D24 1-in SDS-plus Rotary Hammer $237.5 KHE-D24 1-in SDS-plus Rotary Hammer - 600223420. Side Handle - 314000770. Depth Gauge - 627288000. Carrying Case - 344452610 |
|
|
Makita HR2470F 15/16-in SDS-plus Rotary Hammer Drill $189.99 15/16-in SDS-plus Rotary Hammer Drill - HR2470F. Side Handle - 158057-6. Depth Gauge - 324219-0. Tool Case - 824799-1 |
|
|
Metabo 600232420 KHE32 1-1/4-in SDS-plus Rotary Hammer $410 KHE32 1-1/4-in SDS-plus Rotary Hammer - 600232420. Side Handle - 314000770. Depth Gauge - 627288000. Carrying Case - 344452350 |
|
|
Makita HR2811F 1-1/8-in SDS-plus Rotary Hammer with L.E.D. Light $279 1-1/8-in SDS-plus Rotary Hammer w/ L.E.D. Light - HR2811F. Side Handle - 154842-5. Depth Gauge - 324219-0. Plastic Carrying Case - 824789-4 |
|
|
Milwaukee 5262-21 7/8-in SDS Plus 7 Amp Rotary Hammer Kit $199 7/8-in SDS Plus 7 Amp Rotary Hammer Kit - 5262-21. Side Handle. Depth Rod. Carrying Case. Product Manual |
|
|
Milwaukee 5263-21 5/8-in SDS Plus 5.5 Amp Rotary Hammer Kit $189 5/8-in SDS-Plus 5.5 Amp Rotary Hammer Kit - 5263-21. Side Handle. Depth Rod. Carrying Case. Product Manual |
|
|
Bosch 11221DVS 7/8-in SDS-plus Rotary Hammer $399.99 7/8" SDS-plus Rotary Hammer - 11221DVS. Auxiliary Handle - 1 612 025 032. Depth Gauge - Integrated. Dust Extraction Fixture - 1 618 190 006. Hose (23" length) - 2 600 712 002. Adapter for Paper Dust Bags - 2 607 000 178. Cloth Bag Assembly - 2 605 411 044. Carrying Case - 2 605 438 126 |
|
|
Factory Reconditioned Makita HR2475-R 1-in SDS-Plus Rotary Hammer $119.99 1-in SDS Rotary Hammer - HR2475-R. Side handle - 158057-6. Depth guage - 324219-0. Plastic tool case - 824695-3 |