Tubing Pipe Potable

Tubing Pipe Potable

Solar Panels

Solar domestic hot water systems are among the most popular solar technologies considered by those planning to switch to “greener” technologies or want to reduce their heating bills by making use of a free source. Solar hot water systems differ hugely, depending basically to different climate demands: some are specially designed for moderate and hot climates, and others for colder climates.

Different Solar Systems
Some of these systems use flat-plate collectors, while others use evacuated-tubes collectors and batch collectors.
Flat-plate solar collectors are the most used type of solar panels today. Freezing conditions may limit the efficiency of this kind of collectors.Common flat-plate collectors use a liquid (water, glycol) as the heating fluid.They involve a net of flow tubes (where the water or another heating fluid flows), a dark color absorber plate (to absorb the sunlight heat) and a glazing surface. They also comprise an inlet and an outlet connection. Air flat-plate collectors are less common than liquid collectors. As the name implies, they use air as the heating medium, instead of water or other liquid fluid. Their absorber plates are often metal sheets or layers of screen.
Evacuated-tube solar collectors are made up of a set of parallel glass tubes (solar tubes). They are the best collectors for cloudy and freezing climates and for applications demanding high temperatures (evacuated-tube collectors provide temperatures between 75ºC and 175ºC).Evacuated-tube collectors involve literally a visible set of parallel glass tubes (solar tubes). “Evacuated” means a “vacuum” layer within the tubes, where it is also located heat pipes to absorb solar energy and to transfer it to a liquid medium. The vacuum allows very small heat losses and eliminates the impact of ambient temperatures, making evacuated-tube technology particularly suitable for colder climates.
Some solar systems use pumps (active systems) to move the heating fluid while others are based on gravity or natural convection (passive systems).
In some systems there is anti-freezing fluids (glycol, in colder climates), while others use potable water at the collector level.
Closed-loop solar heating systems do not use water into the collectors. Potable water is pumped to the storage tank but never into the solar collectors. It’s the anti-freezing fluid (often a mixture of water and glycol) that circulates in the solar collectors and through a coil of pipe (in the storage tank) and it is in that coil pipe that the potable water is heated. The anti-freezing supports extremely low temperatures and protects the system from damages caused by severe cold. Glycol should be checked each year and changed regularly every few years (depending on temperatures and glycol quality).
Some systems use integrated tank (the batch solar system) and some use (the thermosyphon system) a storage tank on the top of the collector, while others use auxiliary and backup tanks and well separated storage tanks.
Batch systems do not involve pumps and do no demand a separated storage tank, or anti-freezing, heat exchanger, valves, sensors. A batch panel is typically very similar to a flat-plate collector, with a greater depth of at least 6 inches (15 cm). The water is heated directly in the collector (they are open-loop systems) and no pump is used to move the water (they are passive systems).
Their working principle is very basic: whenever the hot water needs to be stored in the batch system, the water pressure moves the hot water on the top of the batch tank (hot water rises naturally to the top of the batch tank).
Thermosyphon systems in their typical configuration do not have pumps and other controls. They are based on the natural convection principle: hot water rises and cold water sinks. In the case of thermosyphon systems: as the potable water (or a antifreeze fluid, in colder climates) entered into the collector it warms and rises to the top of the collector and to the tank, where it is stored (that’s the reason why tanks are always above the collector).

About the Author

John Mahoney is a freelance author who writes about various Renewable Energy realated subjects. For more information about John visit his website
www.techstore.ie.

Potable Water Pipe Markers $2.3 In-stock identimark economy pipe markers are the most economical way to label indoor pipes. Pipe markers securely identify contents of pipes without falling off! Pressure-sensitive vinyl with adhesive backing permanently marks pipes in one, quick application. Marker reads: Potable water.

Potable Pipe Markers $87.69 Wrap-around pipe markers provide easy, self-stick application. Wrap-around self-adhesive potable pipe marker reads: Potable. Pressure-sensitive vinyl overlaps and adheres to itself for a secure fit without arrow tape. Clear coating protects against chemicals and harsh plant conditions. Designed with wording and arrow repeating 65 times per roll every 5-1/2". Wording is reversed every other time so words can be read from each side of pipe. Sold in rolls to cut to the size you need every time. 30 ft. length roll is available in 6-1/2", 8 and 12" widths.

Potable Duromark Pipe Markers $5.8 In-stock duromark pipe markers ship fast with hundreds of legends to choose from. Duromark pipe marker states: "POTABLE." Color is white on green. Choose pipe diameter, 4 sizes. Overlaminate protection shields against dirt, grease, grime, weather and harsh plant conditions. Apply to a clean pipe surface. Just peel and press firmly in place.

Potable Water Duromark Pipe Markers $91.1 Duromark pipe markers on-a-roll are supplied on rolls for easy use & big savings. Duromark pipe markers on-a-roll state: "POTABLE WATER." Overlaminate shield against dirt, grease, grime, weather and harsh plant conditions. Simply peel and press firmly to a clean pipe. Sold in rolls of 72 Duromark pipe markers. Color is white on green. Choose pipe diameter.

Potable Water With Arrow Duromark Pipe Markers $66 Duromark pipe markers on-a-roll are supplied on rolls for easy use & big savings. Duromark pipe markers on-a-roll state: "POTABLE WATER" with arrow. Overlaminate shield against dirt, grease, grime, weather and harsh plant conditions. Simply peel and press firmly to a clean pipe. Sold in rolls of 50 Duromark pipe markers. Color is white on green. Choose pipe diameter.

Self-Adhesive Pipe Markers-On-A-Roll - Potable Water $66.3 Roll form pipe markers for all pipe marking jobs... you determine how large or small the marker should be based on the pipe diameter. Seton's Pipe Markers-On-A-Roll are made of a 6-1/2" wide pressure-sensitive vinyl with a clear protective coating for durability There are 60 identical legends on each 30 foot roll One roll makes 10-60 markers For installation determine marker length, cut at desired mark, remove liner and wrap completely around pipe Marker reads - "Potable Water"

Potable Water Kwik-Koil Pipe Markers $5.4 Kwik-koil pipe markers curl around pipes without having to wipe the pipe clean. Kwik-Koil pipe markers easily snap around pipes.Precoiled to snap securely in place without tape or messy adhesives.Printed with arrows to indicate direction of pipe contents.UV-resistant ink is fade-proof for 5-8 years outdoors.Provides INDEFINITE life when used or STORED in temperatures 70°F.Marker reads:Potable water

Setmark® Snap-Around Pipe Markers - Potable Water $2.8 Save time- No need to clean pipes before installation. Setmark® Pipe Markers are ideal for dirty, greasy or rough surfaces and indoor or outdoor pipes Precoiled markers snap in place; no tape or adhesives necessary and no need to clean or degrease pipes For larger pipes, markers "strap around" with free nylon ties Arrows are included on every marker and each marker is reversible so you don't need to know the flow direction before you order UV resistant inks and heavy vinyl withstand harsh environments Markers meet ASME (ANSI) A13.1-2007 Standard Offered in a variety of sizes - find out which one is right for you Setmark® Pipe Marker reads - "Potable Water"

Poly-Code™ Clear Self-Adhesive Pipe Markers - Non-Potable Water $2.8 Clear self-adhesive pipe markers let pipe color show through. Clear Poly-Code™ 2-mil thick polyester pipe markers are coated with a permanent acrylic adhesive and designed for use on pipes from 3/4" to over 10" for both indoor and outdoor use Quick and easy to apply Polyester markers are intended for commercial and industrial uses Markers have a clear background with either white or black lettering to clearly identify your pipe contents Markers meet ANSI specifications for letter height Our individual arrows are ideal for identifying the flow of pipe contents Poly-Code™ Pipe Markers are available in 5 sizes with Black letters and arrows on a clear polyester background - see our size chart to find out which size marker is best for your application Colored or painted pipes and ducts provide a perfect colored background for clear markers Pipe marker reads - "Non-Potable Water"

Poly-Code™ Clear Self-Adhesive Pipe Markers - Potable Water $2.8 Clear self-adhesive pipe markers let pipe color show through. Clear Poly-Code™ 2-mil thick polyester pipe markers are coated with a permanent acrylic adhesive and designed for use on pipes from 3/4" to over 10" for both indoor and outdoor use Quick and easy to apply Polyester markers are intended for commercial and industrial uses Markers have a clear background with either white or black lettering to clearly identify your pipe contents Markers meet ANSI specifications for letter height Our individual arrows are ideal for identifying the flow of pipe contents Poly-Code™ Pipe Markers are available in 5 sizes with White letters and arrows on a clear polyester background - see our size chart to find out which size marker is best for your application Colored or painted pipes and ducts provide a perfect colored background for clear markers Pipe marker reads - "Potable Water"

Small Pipe & Tubing Markers $1 Perfect for marking piping or tubing less than 1" in diameter. 3" x 3" self-adhesive vinyl markers wrap completely around pipe for easy installation Arrows included on markers to indicate direction of flow Custom worded markers with your choice of 6 colors Letter height: 3/8"

Opti-Code™ Self-Adhesive Pipe Markers - Potable Water $2.5 So easy, just peel and stick. Opti-Code™ Self-Adhesive Pipe Markers are Ideal for indoor pipes Self-adhesive vinyl -- simply peel and press marker into place 5 sizes to mark pipes with diameters from 3/4" to over 10"- see which one is right for you Suitable for dry and clean pipes Pipe temperature range -40° F to 175° F To indicate flow direction and/or provide extra adhesion, use arrows-on-a-roll tape, sold separately All standard markers meet ASME (ANSI) standard when used with arrows on a roll tape Pipe marker reads - "Potable Water"

Opti-Code™ Self-Adhesive Pipe Markers - Non-Potable Water $2.5 So easy, just peel and stick. Opti-Code™ Self-Adhesive Pipe Markers are Ideal for indoor pipes Self-adhesive vinyl -- simply peel and press marker into place 5 sizes to mark pipes with diameters from 3/4" to over 10"- see which one is right for you Suitable for dry and clean pipes Pipe temperature range -40° F to 175° F To indicate flow direction and/or provide extra adhesion, use arrows-on-a-roll tape, sold separately All standard markers meet ASME (ANSI) standard when used with arrows on a roll tape Pipe marker reads - "Non-Potable Water"

Roll Form Self-Adhesive Pipe Markers - Non-Potable Water $119.8 Roll form pipe markers are an economical solution for all your pipe marking jobs. Roll Form Pipe Markers have perforated arrows that can be pulled off and used to indicate flow in either direction Clear laminate strengthens self-adhesive plastic film and protects lettering Two sizes available: 9" x 2" with 1-1/4" letters and 3" x 2" arrows 12" x 3" with 1-3/4" letters and 4" x 3" arrows Comes in a roll of 50 markers Marker reads - "Non-Potable Water" Legend may be abbreviated if necessary

Roll Form Self-Adhesive Pipe Markers - Potable Water $62.7 Roll form pipe markers are an economical solution for all your pipe marking jobs. Roll Form Pipe Markers have perforated arrows that can be pulled off and used to indicate flow in either direction Clear laminate strengthens self-adhesive plastic film and protects lettering Three sizes available: 6-1/2" x 1" with 3/4" letters and 1" x 1-1/2" arrows 9" x 2" with 1-1/4" letters and 3" x 2" arrows 12" x 3" with 1-3/4" letters and 4" x 3" arrows Marker reads - "Potable Water"

Weather-Code™ Self-Adhesive Outdoor Pipe Markers - Potable $3.7 Weather-Code™ self-adhesive pipe markers are the choice for outdoor durability. These 6-1/4" x 2-1/4" markers (2 markers per card) with 2-3/4" x 2-1/4" arrows are made of the best fade-resistant vinyl to withstand harsh weather conditions The pressure-sensitive adhesive has a service temperature of -40° F to 175° F Markers should be applied when temperature is 40° F or higher Detachable arrows can be positioned to indicate flow in either direction Marker reads - "Potable"

Xtreme-Code™ Self-Adhesive High Performance Pipe Markers - Potable Water $3.3 Superior performance in extreme conditions - excellent chemical and weather resistance. Self-adhesive polyester markers with a clear overlaminate to protect against chemicals, abrasion and weather Xtreme-Code™ High Performance Pipe Markers are suitable for indoor and outdoor use on clean, dry pipes Outdoor durability of up to 8 years Simply peel off liner and stick marker to pipe Service temperature -40° F to 230° F (min. application temp. is 0° F) Xtreme-Code™ markers meet ASME (ANSI) A13.1 standard when used with Directional Arrows, sold separately Marker reads - "Potable Water"

Watts Water Technologies Watts Water Technologies 3 4 inx100 Blue Pex Tubing P-34-100B $40.66 3/4?x100 blue pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 3/4? x 100', blue Brand #: Watts Water Technologies P-34-100B UPC: 098268298369 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 3 4 inx100' Red Pex Tubing P-34-100R $40.66 3/4?x100' red pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 3/4? x 100', red Brand #: Watts Water Technologies P-34-100R UPC: 098268298376 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 3 4 inx25' Wht Pex Tubing P-34-25 $10.93 3/4?x25' wht pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 3/4? x 25', white Brand #: Watts Water Technologies P-34-25 UPC: 098268298383 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 3 8 inx100' Wht Pex Tubing WPTC06-100W $21.84 3/8?x100' wht pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 3/8? x 100', white Brand #: Watts Water Technologies WPTC06-100W UPC: 098268311334 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 1 2 inx300 Blue Pex Tubing WPTC08-300B $65.37 1/2?x300 blue pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 1/2? x 300', blue Brand #: Watts Water Technologies WPTC08-300B UPC: 098268336177 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 1 2 inx300' Red Pex Tubing WPTC08-300R $65.37 1/2?x300' red pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 1/2? x 300', red Brand #: Watts Water Technologies WPTC08-300R UPC: 098268336160 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 1 2 inx100' Red Pex Tubing P-12-100R $22.46 1/2?x100' red pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 1/2? x 100', red Brand #: Watts Water Technologies P-12-100R UPC: 098268298116 Keywords: tubing coil flexible pex pipe

Watts Water Technologies Watts Water Technologies 1 2 inx25' Wht Pex Tubing P-12-25 $5.91 1/2?x25' wht pex tubing Flexible, corrosion-resistant, no electrolysis, and freeze damage-resistant PEX pipe can be connected to galvanized, copper, and CPVC systems PEX pipe meets or exceeds ASTM F-876 and F-877 standards PEX pipe is easy-to-install and will handle all normal temperatures and pressures common in residential systems and commercial potable water systems 1/2? x 25', white Brand #: Watts Water Technologies P-12-25 UPC: 098268298123 Keywords: tubing coil flexible pex pipe

Ultra-Mark® Snap-Around High Performance Pipe Markers - Potable Water $7.2 The ultimate marker for harsh environments and outdoor pipe identification. These High Performance Pipe Markers are ideal for dirty, oily, greasy or rough surfaces including stainless steel Over-laminated polyester construction seals in and protects graphics Markers resist abrasion, chemicals, high-humidity and outdoor weather Pre-coiled for easy wrap-around installation on pipes up to 8" in diameter, larger pipes fasten with free nylon ties Arrows included on every marker to indicate flow direction Markers meet ASME (ANSI) Standard Markers come in 6 sizes - see which size is right for your application by viewing our size chart here Pipe temp. range - 40° F to 248° F Marker reads - "Potable Water"

Seton Code® Economy Self-Adhesive Pipe Markers - Non-Potable Water $1 Multiple markers on each card saves you money. Seton Code® Economy Pipe Markers have multiple markers on each card which saves you money Styles SC8 & SC12 meet ASME (ANSI) standards for colors, length of color field and letter height Arrows sold separately to indicate pipe flow (style FF includes arrows) Choose from 4 styles to fit pipes ranging from 1/2" to 8" Style SC8: Fits outside pipe dia. 3/4"to 2-3/8" 4 markers per card Each marker measures 8"w x 1-1/8"h Style SC12: Fits outside pipe dia. 2-1/2" to 8" 2 markers per card Each marker measures 12"w x 2-1/4"h Style CC: Fits outside pipe dia. 3/4" or less 7 markers per card Each marker measures 2-1/4"w x 1-1/4"h Style FF: Fits outside pipe dia. 1-1/4" to 6" 2 markers and 2 arrows per card Each marker measures 6-1/4"w x 2-1/4"h with 2-3/4"w x 2-1/4"h detachable arrow Marker reads - "Non-Potable Water"

Seton Code® Economy Self-Adhesive Pipe Markers - Potable Water $1 Multiple markers on each card saves you money. Seton Code® Economy Pipe Markers have multiple markers on each card which saves you money Styles SC8 & SC12 meet ASME (ANSI) standards for colors, length of color field and letter height Arrows sold separately to indicate pipe flow (style FF includes arrows) Choose from 4 styles to fit pipes ranging from 1/2" to 8" Style SC8: Fits outside pipe dia. 3/4"to 2-3/8" 4 markers per card Each marker measures 8"w x 1-1/8"h Style SC12: Fits outside pipe dia. 2-1/2" to 8" 2 markers per card Each marker measures 12"w x 2-1/4"h Style CC: Fits outside pipe dia. 3/4" or less 7 markers per card Each marker measures 2-1/4"w x 1-1/4"h Style FF: Fits outside pipe dia. 1-1/4" to 6" 2 markers and 2 arrows per card Each marker measures 6-1/4"w x 2-1/4"h with 2-3/4"w x 2-1/4"h detachable arrow Marker reads - "Potable Water"

Weather-Code™ Self-Adhesive Outdoor Pipe Markers - Non-Potable Water $3.7 Weather-Code™ self-adhesive pipe markers are the choice for outdoor durability. These 6-1/4" x 2-1/4" markers (2 markers per card) with 2-3/4" x 2-1/4" arrows are made of the best fade-resistant vinyl to withstand harsh weather conditions Fits pipes with outside diameter of 1-1/4" thru 6" The pressure-sensitive adhesive has a service temperature of -40° F to 175° F Markers should be applied when temperature is 40° F or higher Detachable arrows can be positioned to indicate flow in either direction Marker reads - "Non-Potable Water"

Weather-Code™ Self-Adhesive Outdoor Pipe Markers - Potable Water $3.7 Weather-Code™ self-adhesive pipe markers are the choice for outdoor durability. These 6-1/4" x 2-1/4" markers (2 markers per card) with 2-3/4" x 2-1/4" arrows are made of the best fade-resistant vinyl to withstand harsh weather conditions Fits pipes with outside diameter of 1-1/4" thru 6" The pressure-sensitive adhesive has a service temperature of -40° F to 175° F Markers should be applied when temperature is 40° F or higher Detachable arrows can be positioned to indicate flow in either direction Marker reads - "Potable Water"

Setmark® Snap-Around Pipe Markers - Non-Potable Water $2.8 Save time- No need to clean pipes before installation. Setmark® Pipe Markers are ideal for dirty, greasy or rough surfaces and indoor or outdoor pipes Precoiled markers snap in place; no tape or adhesives necessary and no need to clean or degrease pipes For larger pipes, markers "strap around" with free nylon ties Arrows are included on every marker and each marker is reversible so you don't need to know the flow direction before you order UV resistant inks and heavy vinyl withstand harsh environments Markers meet ASME (ANSI) A13.1-2007 Standard Offered in a variety of sizes and colors - find out which one is right for you Setmark® Pipe Marker reads - "Non-Potable Water"

Wrap Around Adhesive Roll Markers - Potable Water $84.6 Eliminates the need for precise measurements of the pipe diameter - simply cut to the size you need from a 30' roll. Conform to ANSI requirement for length of color field Legend repeats 65 times per roll Available in 8" or 12" widths 8"W x 30'L has 3/4"H letters and fits Pipe OD 3/4" thru 2-3/8" 12"W x 30'L has 1-1/4"H letters and fits Pipe OD 2-1/2" thru 7-7/8" Marker reads - "Potable Water"

54026 Exhaust Pipe and Silicone Joint Tubing $15.04 Exhaust Silicone Joint Tubing

Tubing (Material) $70.1 High Quality Content by WIKIPEDIA articles Tubing is a pipe or hollow cylinder for the conveyance of fluids (liquids or gases). The terms pipe and tubing are almost interchangeable, although minor distinctions exist generally, tubing implies tighter engineering requirements than pipe. Both pipe and tube imply a level of rigidity and permanence, whereas a hose is usually portable and flexible. Tubing and pipe may be specified by standard pipe size designations, e.g., nominal pipe size, or by nominal outside or inside diameter and/or wall thickness. The actual dimensions of pipe are usually not the nominal dimensions: A 1inch pipe will not actually measure 1 inch in either outside or inside diameter, whereas many types of tubing are specified by actual inside diameter, outside diameter, and/or wall thickness. There are many industry and government standards for pipe and tubing. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 90 Publication Date: 2010/07/22 Language: English Dimensions: 6.00 x 9.02 x 0.22 inches

Ridgid® - Plastic Pipe and Tubing Cutters $42.8 No twisting and ratcheting pliers. Pipe Cutters with patent-awaiting X-CEL™ blade for swift one stroke cutting, no twirling or ratcheting necessary. Hand tools with strong construction for intensive usage. Pipe cutters with trouble-free turn-thumb latch for dependable storeroom. Hand tools X-CEL™ immediate transforming blade. Ergonomic clasps underneath the handle are distanced at 1/2" increments to work as a swift pipe measuring scale.

Xtreme-Code™ Self-Adhesive High Performance Pipe Markers - Non-Potable Water $3.3 Superior performance in extreme conditions - excellent chemical and weather resistance. Self-adhesive polyester markers with a clear overlaminate to protect against chemicals, abrasion and weather Xtreme-Code™ High Performance Pipe Markers are suitable for indoor and outdoor use on clean, dry pipes Outdoor durability of up to 8 years Simply peel off liner and stick marker to pipe Service temperature -40° F to 230° F (min. application temp. is 0° F) Xtreme-Code™ markers meet ASME (ANSI) A13.1 standard when used with Directional Arrows, sold separately Marker reads - "Non-Potable Water"

PVC Tubing Tube Plastic Pipe Cutter Tool $12.99 Description:The Tubing Cutter is suitable for cutting Plastic, PVC, Polyethylene, and Synthetic Pipes (along with other similar material pipe or tubing)Open maximum cutting capacity: 1 5/8" (42mm)Anti-Rust and Anti-Wear construction PVC Pipe CutterHeat treated blade of the Tube Cuter for long cutting lifeColor may be a little different from the pictureSize: about 19 x 9 x 1cm (L x W x H)Weight: 295g

Ultra-Mark® Snap-Around High Performance Pipe Markers - Non-Potable Water $7.2 The ultimate marker for harsh environments and outdoor pipe identification. These High Performance Pipe Markers are ideal for dirty, oily, greasy or rough surfaces including stainless steel Over-laminated polyester construction seals in and protects graphics Markers resist abrasion, chemicals, high-humidity and outdoor weather Pre-coiled for easy wrap-around installation on pipes up to 8" in diameter, larger pipes fasten with free nylon ties Arrows included on every marker to indicate flow direction Markers meet ASME (ANSI) Standard Markers come in 6 sizes - see which size is right for your application by viewing our size chart here Pipe temp. range - 40° F to 248° F Marker reads - "Non-Potable Water"