Twist Bit Glass

Twist Bit Glass

You can make guacamole that people will rave about! It's easy, and you don't need any fancy kitchen utensils or appliances.

What You'll Need To Have Ready

Assemble the following kitchen items:

• Cutting board
• Sharp knife
• A shallow-lipped dish or bowl, preferably with a flat bottom
• A potato masher, hand-held is better than an electric whipper

Ingredients (for one batch, feeds 2-4 people as a side dish or dip for chips):

• 2 Haas avocados*
• Fresh cilantro (usually comes in a small bunch or plastic bag in the produce area)
• 2 Roma tomatoes
• 2 fresh limes (not lime juice)
• Sour Cream (fat-free is OK)
• 1 package of Guacamole seasoning (Schilling, McCormick, or Lawry)
• Cumin (a spice)
• Your favorite salsa (homemade or favorite brand)
• Favorite tortilla chips

* Do not use green-skinned "Chilean" avocados. Haas (or "California") avocados have a very dark skin, almost brown, and the skin has a "wrinkled" appearance. To select avocados that are "ripe" (ready to use), pick up the avocado, hold it in your palm (like you are holding a ball), and squeeze very gently, but with some pressure. The avocado should "give" a little (that is, not feel solid or too firm). If it is "squishy" (really soft), then try another one. Don't buy too far ahead of time (I like to get them the day before). DO NOT REFRIGERATE prior to making the guacamole.

Making the Guacamole

1. Rinse the avocados. With a sharp knife, but avocado in half. There is a very hard "seed" inside the avocado, so after you've sliced it all the way around, grasp the two halves and "twist" to pull apart. You can scoop out the seed with a spoon, then scoop avocado flesh out of the skin and put in the dish or bowl.

2. Pinch off several leaves from the tops of the cilantro and rinse. Trim off stems. Cut through the leaves many times until as finely minced as possible. Scrape into avocado.

NOTE: Cilantro is very potent. Start with just a little bit. After the guacamole has been completely mixed, taste test. If you need more "zest," then begin to add a little more cilantro and taste. Continue until you have the zesty flavor that is right for you!

3. Rinse the tomatoes. Cut in small pieces and then mince as finely as possible. Add to the avocado.

NOTE: I like to do the cilantro first, and then the tomatoes, without rinsing off the cutting board. This way, you can pick up all the cilantro flavoring that's still on the cutting board!

4. Cut one lime in half. Take one half and squeeze most of the juice into the avocado.

NOTE: Limes can be very strong, flavor-wise. Start with just half a lime. If you need more of a lime flavor, after making the guacamole, you can squeeze in a little more juice. Be careful! Don't add too much liquid to the guacamole or it will be too runny!

5. Spoon in a dollop of sour cream (about a soup-spoonful) into the avocado.

6. Open and empty the entire packet of guacamole seasoning into the avocado.

7. Add a "pinch" of cumin to the avocado.

NOTE: Cumin is a very strongly flavored spice. Add in just a little bit at a time until you have the right taste that's best for you.

8. Add a spoonful of salsa (about a soup-spoonful) to the avocado.

Now that you have all the ingredients in one bowl, begin to mash (with your potato masher). Continue mashing until almost all of the avocado has been mashed smooth (that is, mash until only little chunks of avocado are left, some avocado will be thoroughly mashed like mashed potatoes).

Taste, using a chip that you are going to serve with it. Depending on your personal preferences, you can now begin to add small amounts of cilantro, lime, and cumin until you have just the right zestiness! If you go overboard on any one ingredient, you can offset with little pinches of sugar (add in a pinch at a time, mix well, and taste), until you have the perfect flavor.

Provides enough dip for 2-4 people. If using as a side dish to tacos, burritos, or fajitas, you might want to double the recipe so that you have enough for the side dish and as a dip for chips.

When To Make and How To Store Your Guacamole

You can make the guacamole ahead of time, although I recommend that you make it the same day that you are going to serve it.

Put freshly made guacamole in a glass dish or container, and refrigerate. If you are going to be refrigerating for more than 6 hours, add 1 teaspoon of reconstituted lemon juice, and mix in well. This will prevent the guacamole from turning brown.

When you are ready to serve, I suggest that you serve in a wooden bowl. Using a cut lime, smear the inside of the wooden bowl with just enough lime juice to wet the surface. Spoon in the guacamole.

For a festive touch, spoon a very small dollop of sour cream into the middle of the guacamole. Break off one or two leaves of cilantro, leaving enough stem so that you can push down into the sour cream (so that the cilantro leaves stand up). Then rim the outer edge of the guacamole with a little bit of freshly minced tomato.

Serve with chips or as a side dish to your favorite Mexican or Tex-Mex meal!

About The Author

Jan K., The Proofer is freelance proofreader and copyeditor.

Visit http://www.janktheproofer.com for more information about Jan’s services; for work at home articles and free printables. For work at home moms, visit Jan’s sister site [http://work-at-home.momsbreak.com] for articles, free printables, and work at home T-shirts and other fun products.

© Copyright 2004 All rights reserved.

Mika Elite Jewelry Bit $44.95 Finish Glass Like a Pro. Use this bit to add a small groove into fused glass or other centerpieces of your next piece of jewelry. By adding a groove, you can easily attach wire, string, or other material when finishing your wearable jewelry. Your pieces will be ready to hang and worn proudly. Below Step-by-Step Wire Wrapping Using a Jewelry Bit See images 2-5 below 1. Grind a groove around edges of glass cabochon with a jewelry bit. 2. Wrap wire around cabochon firmly from bottom, ending at top. Grip wire with pliers and twist to secure. 3. Bring wires up and wrap around a dowel 1/4 away from cabochon. 4. Using wire nippers, trim ends around base to secure and tuck in ends. Images from Innovative Adornments book 6294. Artist Jayne Persico.

Glastar Jewelry Bit $52.95 Made with a patented diamond bonding process for extra long life. Creates a groove to fit 16 and 18 gauge wire. Assists in securely wire wrapping 3-D glass sculptures and glass jewelry. Eliminates the need to glue jewelry findings. 220 grit. Fits Glastar G3, G4, G7, G12, G14 and all Inland Grinders. Close-up of this item below. Step-by-Step Wire Wrapping Using a Jewelry Bit See images below 1. Grind a groove around edges of glass cabochon with a jewelry bit. 2. Wrap wire around cabochon firmly from bottom, ending at top. Grip wire with pliers and twist to secure. 3. Bring wires up and wrap around a dowel 1/4 away from cabochon. 4. Using wire nippers, trim ends around base to secure and tuck in ends. Images from Innovative Adornments book 6294. Artist Jayne Persico.

Glastar Bit Adapter $13.95 Use to fit Glastar 1/4 Bit and 1/8 Bit on Inland and DTI grinders and Glastar G7.

Twofers Grinding Bits - Jewerly Bits $39.95 Two Bits for the Price of One. Aanraku brings you Twofers - superior quality, low-cost grinding bits. Use jewelry bits to grind a groove into the edges of jewelry for finishing and wire wrapping. A huge time saver. Best of all, your jewelry pieces will be more durable. Bits fit most glass grinders. Diamond mesh grit is 220 for fine grinding. Step-by-Step Wire Wrapping Using a Jewelry Bit See images below 1. Grind a groove around edges of glass cabochon with a jewelry bit. 2. Wrap wire around cabochon firmly from bottom, ending at top. Grip wire with pliers and twist to secure. 3. Bring wires up and wrap around a dowel 1/4 away from cabochon. 4. Using wire nippers, trim ends around base to secure and tuck in ends. Images from Innovative Adornments book 6294. Artist Jayne Persico.

Grinder Bit Pack $44.95 Stock up on the bits you need and save in the process. These high quality Silver Bullet Bits are chrome hardened for performance, strength, and durability. Pack contains one 1/4 Cap Bit, one 3/4 standard bit, and one 3/4 fast bit. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5 and G-8.

Inland Dropon Bit Adapter $7.95 This two-part grinding bit system consists of a DropOn Diamond Bit Sleeve which fits on a DropOn Bit Adapter. Inland DropOn bits interlock with a bit adapter, removing the need for a wrench or other tool to change bits - just drop it on and go. The two parts interlock while the grinder motor is on, but are easily separated when the motor is off. No wrenches or tools are needed to change from one bit to another.

Innovative Adornments $21.95 Learn how to make distinctive fused jewelry using wire wrapping techniques to produce spectacular personal adornments. Create gorgeous glass pendants, watchbands, bracelets, rings and more. Includes over 250 color photos, 12 projects and 80 art pieces for inspiration. Artist of pendant is Jayne Persico. Step-by-Step Wire Wrapping See images 2-5 below 1. Grind a groove around edges of glass cabochon with a jewelry bit. 2. Wrap wire around cabochon firmly from bottom, ending at top. Grip wire with pliers and twist to secure. 3. Bring wires up and wrap around a dowel 1/4 away from cabochon. 4. Using wire nippers, trim ends around base to secure and tuck in ends. Images from book. Artist Jayne Persico.

1 Glastar Coarse Bit $81.95 Made with a patented diamond bonding process for extra long life. For rapid grinding, use this coarse 60 mesh grit bit.

Inland Fine Lamp Bit $43.95 Two different angles will grind mitred edges so that flat panel lamp shade pieces fit flush. The Lamp Bit is used to grind lamp pieces and other 3-dimensional projects that fit on a miter for a better joint. Use the Fine Grit Lamp Bit for delicate glass and specialty glasses like mirror and antiques. The Lamp Bit is reversible, with one side at a 9 degree angle for 20 panel lamps, and the other side at an 18 degree angle for 10 panel lamps. Use the side that comes closest to your lamp. Fits all grinders except DTI blue models and Glastar All Star.

Bead Reamer Bit 3mm $59.95 The Best Way to Clean Your Beads These handy bead reamer bits fit onto a glass grinder shaft just like other bits, and make the process of bead release removal quicker and easier. 1/8 (3mm) diameter. See a picture of this bit in action below. Bead reamer is also available in 2mm (item 30370).

Bead Reamer Bit 2mm $64.95 The Best Way to Clean Your Beads These handy bead reamer bits fit onto a glass grinder shaft just like other bits, and make the process of bead release removal quicker and easier. 5/64 (2mm) diameter. See a picture of the bead reamer in action below. This bit is available in 3mm (item 30385).

3/4 Inland Bit $19.95 Inland and 39;s standard 3/4 grinder bit fits the Wiz, Wizling, and Aero grinders, as well as all other models we offer that accept a 3/4 bit. Includes allen wrench for fast and easy adjustment and secure positioning.

1 Inland Drop-on Standard Bit $26.95 Inland DropOn bits interlock with a bit adapter, removing the need for a wrench or other tool to change bits - just drop it on and go. Use with item 40100, Inland and 39;s Drop-On Bit Adapter (sold separately). This two-part grinding bit system consists of a DropOn Diamond Bit Sleeve which fits on a DropOn Bit Adapter. The two parts interlock while the grinder motor is on, but are easily separated when the motor is off. No wrenches or tools are needed to change from one bit to another.

1 Inland Drop-on Speed Bit $33.95 Inland DropOn bits interlock with a bit adapter, removing the need for a wrench or other tool to change bits - just drop it on and go. Use with item 40100 Bit Adapter (sold separately). This two-part grinding bit system consists of a DropOn Diamond Bit Sleeve which fits on a DropOn Bit Adapter. The two parts interlock while the grinder motor is on, but are easily separated when the motor is off. No wrenches or tools are needed to change from one bit to another.

3/4 Inland Standard Drop-on Bit $19.95 Inland DropOn bits interlock with a bit adapter, removing the need for a wrench or other tool to change bits - just drop it on and go. Use with item 40100, Inland and 39;s DropOn Bit Adapter (sold separately). This two-part grinding bit system consists of a DropOn Diamond Bit Sleeve which fits on a DropOn Bit Adapter. The two parts interlock while the grinder motor is on, but are easily separated when the motor is off. No wrenches or tools are needed to change from one bit to another.

1 Inland Drop-on Fine Bit $33.95 Inland DropOn bits interlock with a bit adapter, removing the need for a wrench or other tool to change bits - just drop it on and go. Use with item 40100 Drop-On Bit Adapter (sold separately). This two-part grinding bit system consists of a DropOn Diamond Bit Sleeve which fits on a DropOn Bit Adapter. The two parts interlock while the grinder motor is on, but are easily separated when the motor is off. No wrenches or tools are needed to change from one bit to another.

3/4 Inland Drop-on Fine Bit $19.95 Inland DropOn bits interlock with a bit adapter, removing the need for a wrench or other tool to change bits - just drop it on and go. Use with item 40100, 3/4 Bit Adapter (sold separately). This two-part grinding bit system consists of a DropOn Diamond Bit Sleeve which fits on a DropOn Bit Adapter. The two parts interlock while the grinder motor is on, but are easily separated when the motor is off. No wrenches or tools are needed to change from one bit to another.

3/4 Tapering Lamp Bit $38.95 Use this bit to insure multiple panel lamps fit together accurately. Tapering the vertical edges of your panels, either to a 9 degree angle or an 18 degree angle, will allow you to use less solder and the lamp will be stronger.

Inland Bit Adapter $7.95 The easy way to drill precision holes and create fine details without ever having to remove your standard grinding head. This bit adapter lets you work right on top of larger diamond drums, eliminating the need to change or remove your 1/4 or 1 drum before using one of Inland and 39;s glass drilling bits. The drilling bits fit easily into the adapter, and the adapter is necessary for using any of Inland and 39;s individual drilling bits (items 40318, 40314 and 40338).

3/4 Quick Fit Bit Diamond Sleeve $38.95 The quick fit bit system is unlike any other bit in stained glass. It is designed to be quick to change without the use of a hex wrench or other tools like conventional grinder bits. With a flip action of the holder and 39;s lever, you can change your bit, or the grit of the bit, in seconds. There and 39;s no need to find and use keys or locking tools - no grinder freeze-ups. Replacement for Quick Fit Bit System 8402. Note this is the diamond bit sleeve only. Holder sold separately, see 8402.

Gryphon Twister Grinder $189.95 Get 4 Free Bits. Stretch your budget with top-quality tools plus 4 free grinder bits. When you purchase this product by August 31st, 2012 Gryphon will send you 4 free grinder bits by mail. Download the special offer Claim Form for instruction on how to get your free bits. The Gryphon Twister offers a revolutionary advance in comfort. By simply rotating the base, the grinding surface converts from horizontal to inclined. For the first time, you can sit while grinding. Even if you stand, the inclined work surface reduces fatigue because you no longer need to stoop over your work to see what you are doing. See specifications and features for full product details. Gryphon Slip-on Bits are the industry and 39;s easiest to change. The bits slip onto the shaft and held securely in place with a slight twist. To remove a bit, you simply lift it straight up. 1 and 3/4 bits are easily interchanged in seconds without tools or levers. An automatic pump supplies a constant flow of water directly to the bit regardless of saw orientation. Because of the way the water is directed onto to the bit, there is virtually no splash. No sponge is required in this arrangement. Pump must be primed first. The Twister comes with a starter bit, to be able to use standard replacement bits, simply remove the plastic sleeves first (as shown below).

1/8 Glastar Bit $27.95 Made with a patented diamond bonding process for extra long life. Fits Glastar G5, G6, and G8 grinders for grinding extra small, tight areas. Fits Inland, Red DTI Max and Glastar G7 grinders with bit adapter 5218A. For extra control and support when grinding with this bit use the Glastar Universal Mini Table 30760.

1/4 Inland Bit $25.95 Inland and 39;s standard 1/4 replacement bit for the Wizard, Wiz and Impulse grinders, also fits all other models we offer that accept a 1/4 bit. Grinds tight inside curves with precision and ease. Works best when used with a Second Story Work Surface (item 7225). Includes allen wrench for fast and easy adjustment and secure positioning.

Inland 1 Standard Grinding Bit $23.95 Inland and 39;s standard 1 grinder bit will fit the Wizard, as well as all other models we offer that accept a 1 bit. Includes allen wrench for fast and easy adjustment and secure positioning.

Inland 1 Fine Grinding Bit $34.95 Inland and 39;s fine 1 grinder bit will fit the Wizard, as well as all other models we offer that accept a 1 bit. Includes allen wrench for fast and easy adjustment and secure positioning.

3/4 Mika Elite Mirror Bit $61.95 Eliminate Glass Chipping. Standard grinder bits can chip the edges of mirror, flashed antique and other delicate glass. These bits virtually eliminate chipping, help to prevent mirror black edge, and can be used to add a decorative edge to any glass. The fine grit prevents chipping. Use this bit for decorative mirror edging or for edging ripple and rough textured glass. According to the manufacturer, the special design and fine grit diamonds virtually eliminate chipping and black edge on mirrors. The groove in the bit grinds at several angles at once, avoiding silver edge chips and helping to prevent mirror black edge.

Inland Lamp Bit $42.95 For Perfect Fitting Lamp Pieces The two different angles on this bit grind mitred edges so that panel lampshades (like those below) fit flush. Use to grind lamp pieces and other 3-dimensional projects that fit on a miter for a better joint. Features a reversible design, with one side at a 9 degree angle for 20 panel lamps, and the other side at an 18 degree angle for 10 panel lamps. Use the side that comes closest to your lamp. Fits all grinders except DTI blue models and Glastar All Star. First lamp created by Delphi Glass Expert Keturah Esch. Second lamp pattern from Innovative Panel Lamp book 6399.

3/4 Quick Fit Bit Diamond Sleeve Replacement $18.95 The quick fit bit system is unlike any other bit in stained glass. It is designed to be quick to change without the use of a hex wrench or other tools like conventional grinder bits. With a flip action of the holder and 39;s lever, you can change your bit, or the grit of the bit, in seconds. There and 39;s no need to find and use keys or locking tools - no grinder freeze-ups. Standard replacement diamond bit sleeve for the Glastar Superstar II Grinder ( 5195 ). Also replacement for Quick Fit Bit System 8402. Note this is the diamond bit sleeve only. Holder sold separately, see item 8402.

1/4 Gryphon Core Drill Bit $14.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/4 Core bit with 6mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

2 Gryphon Core Drill Bit $51.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 2 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1/8 Gryphon Core Drill Bit $12.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/8 Core bit with 4mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1 Gryphon Core Drill Bit $29.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1-1/4 Gryphon Core Drill Bit $33.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1-1/4 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

3/4 Gryphon Core Drill Bit $24.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 3/4 Core bit with 8mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1-1/2 Gryphon Core Drill Bit $42.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1-1/2 Core bit with 12mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1/2 Gryphon Core Drill Bit $18.95 Gryphon and 39;s core drill bits for glass artists feature the same high quality coating as their well-respected grinder bits. Diamond bits quickly and easily remove a complete circle in glass. Core bits work with a standard electric drill and only need water as a lubricant. 1/2 Core bit with 8mm shank. Shown below are the packaging and examples of projects that can be created using core drill bits. Fused pendant uses 1/8 core drill bit for a perfect hole for stringing. Water lily table fountain by artist Teresa Batten was created with fused flower molds and assembled using a core drill bit to accommodate the fountain and water flow. Fused glass sink by artists Val Oswalt and Roy Kapp was created using a core drill bit to create the hole to accommodate plumbing. Also shown is the entire core drill bits offering by Gryphon, allowing glass artists to always find the right bit for the job.

1 Inland Speed Bit $34.95 These bits make grinding glass faster. Their unique pattern puts more diamond on your glass at critical cutting points, producing high-speed shaping. Caution may chip delicate glass.

3/4 Inland Speed Bit $30.95 These bits make grinding glass faster. Their unique pattern puts more diamond on your glass at critical cutting points, producing high-speed shaping. Caution may chip delicate glass.

3/8 Glastar Diamond Drill Bit $31.95 Diamond drill bits from Glastar make holes in glass fast. Make openings for clockworks, jewelry and other things. They work with any electric drill and only need water as a lubricant. Each bit drills 50-60 holes. Made with a patented diamond bonding process for extra long life.

1/8 Glastar Diamond Drill Bit $27.95 Diamond drill bits from Glastar make holes in glass fast. Make openings for clockworks, jewelry and other things. They work with almost any electrical drill and only need water as a lubricant. Each bit drills 50-60 holes. Made with a patented diamond bonding process for extra long life.